KCKKen's latest activity
-
KI may go that route. We'll see. Contact cement is slowing down my progress greatly. Here's the first layer of EVA foam to level out...
-
KWas thinking of redoing mine myself, but decided to go with this one. Took a couple of hours and putting it in and out half a dozen...
-
KProductive day. Stripping off the original dash is not fun. Heat is your friend. Managed to get it down to mostly shiny...
-
KCan’t wait to see a truck on that frame someday! You make some good points. 1 being, powder coat isn’t any better. It won’t get into...
-
KKCKKen replied to the thread Eastwood Versus POR15.Thanks for that advice, will definitely keep that in mind. Yes, here in Kansas it will get a diet of salt in the winter. I plan on...
-
KIf you’re going through the process of blasting it clean to bare steel, you don’t want rust reformer type coating, you want paint...
-
KCraig85 turned me on to this stuff, It's great.
-
KWire brushed my frame, degreased, black epoxy primer, Magnet Chassis black, on clear coat, but I should have, ran out of time. Used...
-
KI painted the frames of my K5 and C20 after blasting with a quality primer and 2k chassis paint from the same company. I applied it...
-
KI did a frame up pickup resto once. Had everything dipped. Frame got PR'd. That was a waste of time and money. Even dipped, you just...
-
KI've used the Eastwood products. The brush on style encapsulator works amazing. Aerosol can is good to have for touch up. The rust...
-
KI used POR 15 on a Quadrajet once. Watch the $hit fly now,mwaahaha!!!!
-
KThe Project Farm guy also did a comparison test. While not as thorough of a test (in my opinion), it was done on a test surface and...
-
KKCKKen replied to the thread Eastwood Versus POR15.Thanks for the video, very informative! It gave me a new perspective on what to use (and what not to use). My objective with the...
-
KKCKKen reacted to TotalyHucked's post in the thread Radiator support LMC standard or premium? with
Like.
Idk what LMC is marketing as "standard" or "premium" but I can tell ya ours are the best on the market. Compared to the "crash parts"...
