JBswth's latest activity
-
JBeware of junkyard takeout guages. Remember, most are nearly as old as yours are, if not older. Like Rick F said, it’s generally less...
-
JUnless I'm missing something, why not just replace your damaged gauges? Make a close inspection of your printed circuit, looking for...
-
JJBswth replied to the thread Freeze plugs into the block- how to remove?.That's just about the only way. You shouldn't leave them in, as they act sort of like a beaver dam and cause a big lump of scale to...
-
JI've latched on to them with vice grips or needle nose pliers and yanked.
-
JJBswth replied to the thread Crack/Knick in 350 Cylinder Wall.That is a crack. A score would be straight. You can have it sleeved, but first mike the other cylinders. If they are already at...
-
JJBswth replied to the thread AC system identification.I think you have a system made by Hurricane Air. I would contact them and furnish some pictures, and see if they can help you. J. B.
-
JMine doesn't like cold weather and it has all of the 1981 factory goodies to heat the snorkel. Without the crossover in the heads, it...
-
JJBswth replied to the thread Need a bit more oomph....First, determine what your gear ratio is. If it is overgeared, putting a more aggressive cam in it will only make it worse. What size...
-
JWell, you need to know what you have before we can give recommendations. Find the numbers on the engine and post them up here. Also any...
-
JBiggest bang,for cheap bucks is going to be gears,cam,and headers/better exhaust. You already have a 4 barrel manifold a different one...
-
JJBswth replied to the thread Recognize this?.Sport mirror mounting re-enforcement. J. B.
-
JIt's the brace inside the door for the mirror IIRC
-
JJBswth reacted to CheemsK1500's post in the thread SWAPPING 84 c10 body onto 84 k10 FRAME with
Like.
73-80 trucks have removable/swappable transmission humps, 81+ squares do not. If you resort to cutting and welding to change humps... -
JJBswth reacted to scrap--metal's post in the thread SWAPPING 84 c10 body onto 84 k10 FRAME with Like.
There will be clearance between the 4wd transmission and the 2wd floor, but your 4wd shifter needs the 4wd hump to be in the correct...
-
JTake both springs out, flip them over and compare the height of the two.. is there a difference? If there is there’s your issue, if not...
