fast 99's latest activity
-
fast 99 replied to the thread 1987 suburban tbi 350 overheating..Take hood off and sit on motor. lol Just get a heat gun and compare to temp gauge. They cost around $20. -
fast 99 replied to the thread 1987 suburban tbi 350 overheating..Think you just need to varify the temperature. Those factory indicators [not gauges] and/or old wiring could be faulty.
-
fast 99 replied to the thread Edelbrock carbs on a 350 sm blk.Not saying Edlebrock carbs are bad. Have installed many with success. I do wonder how many are checked with a 02 meter or infrared...
-
fast 99 reacted to PrairieDrifter's post in the thread Hydro boost brakes awful sound after finishing motor swap with
Like.
Have you tried bleeding it at all? Just finished as in never driven or really ran? Sounds like air in the system. I'm not fluent in the... -
That carburetor looks like one of those new chinesium quadrajets. From my reading on those, no good. If there's a warranty, return it...
-
Because it's a chinesium carburetor. They look great. That's all. Pure junk
-
fast 99 replied to the thread 1987 suburban tbi 350 overheating..What you describe actually sounds normal. What occurred that made you suspect overheating? NAPA has 2 lines of stats. Never had any...
-
fast 99 replied to the thread Leaking fuel.Bottom picture finger is pointing at breather. Loops back around into the square hole in air cleaner. Breather filter is missing also...
-
Most likely float level is too high,maybe float is heavy,. Carbureator looks new my 1st guess is not put together correctly from the...
-
fast 99 replied to the thread 1987 suburban tbi 350 overheating..Are you saying motor ran higher than 180 with a 180 stat? new condition? Is a temp gun available to confirm temp? Does the fan clutch...
-
If it ain’t broke, don’t fix it. I don’t have much confidence in the injector cleaner in a can. Anyone who has tried to remove carbon...
-
fast 99 replied to the thread Rochester Quadrajet Woes.Respectfully disagree, after doing emission work for 20+ years brass floats to not react the same or hold fuel at the same level. I was...
-
fast 99 reacted to SquareRoot's post in the thread ANYONE USED VORTEC HIGH SWIRL HEADS ON THEIR GEN-I SBC? with Like.
Aftermarket manifolds are limited, expensive and suck with a carburetor because they have no heat crossover. The heads are heavy and...
-
fast 99 replied to the thread ANYONE USED VORTEC HIGH SWIRL HEADS ON THEIR GEN-I SBC?.There are several brands of inexpensive aluminum heads available for small blocks. Some complete sets are as cheap as $1000. It is easy...
-
fast 99 replied to the thread EFE to Manifold Gasket Question.Actually the later style header pipe to heat riser is much better with the spring style connection. The earlier stud/nut type would...
