Edelbrock's latest activity
-
Edelbrock replied to the thread Lost Two Gen 3 LS Engines in my 1986 C10 2WD.Lets talk about this. -
Edelbrock reacted to 1978cheynne's post in the thread New here , clutch slave master cylinder help. with
Like.
Okay thank you ! I'll keep going till it looks better -
Edelbrock replied to the thread New here , clutch slave master cylinder help..Clear is always better.
-
Edelbrock replied to the thread Power loss with aggressive acceleration.Might be using up the fuel in the carb faster than it can be replenished. A way to test, would be to to fill the car through the vent...
-
Edelbrock replied to the thread TH350 intermittent leak.Many auto parts stores do, but the most convenient seller is Amazon. Maybe $18 per bottle. During the pandemic, the production of...
-
Edelbrock replied to the thread TH350 intermittent leak.You seals are probably dried out and hard. When the temperature changes the seal cant form to the parts that way it used to and a leak...
-
-
Edelbrock replied to the thread 350 High Inconsistent Idle.I would check for vacuum leaks with a smoke gun (you can make one very easily using a cigarette). Maybe the vacuum line to the trans...
-
Edelbrock replied to the thread 305 to 454 swap.Just in general, you can call an auto parts store and ask them to cross reference the parts to the vehicles / engines to see if its the...
-
Edelbrock replied to the thread Bent fuel pump rod.Wrong fuel pump? Wrong push rod?
-
Edelbrock replied to the thread TH350 intermittent leak.I have seen transmissions push fluid out of the filler tube. It might be worth cleaning the outside of the filer tube, and then rubber...
-
Edelbrock replied to the thread front wheel barings.One way to be certain is to pull your old ones out and check the numbers printed on them. Then get them from Amazon with same day or...
-
Another vote for The Right Stuff. After using that I don’t use anything else. We’ve even used it at work on a few things.
