Craig Nedrow's latest activity
-
Craig Nedrow reacted to Tank6x2's post in the thread Removing AC unit - Is there a big hole to fill? with
Like.
You’ll need a housing without AC, hole remains the same but until you get the heater core housing assembly without AC - it’s a can of... -
Craig Nedrow reacted to Russtypickle's post in the thread Removing AC unit - Is there a big hole to fill? with Like.
Hi All, I've got a Blazer with factory AC but it was disconnected ages ago and nothing on it works. My question for those who have done...
-
I been reading up on some of your posts. You certainly have had a rough life. You have strength that I cannot fathom. God bless you and...
-
Thank you for your service and welcome! Post up some pictures, I would love to see.
-
It is and I put in a 4L80E. Did fix the issues with the 12 valve Cummins before I put it in,one was take the timing cover off and fix...
-
I also learned not to let my disability hold me back and got to the blazer once I got my prosthetic leg getting used to wearing it. The...
-
Welcome young lady and thank you for all you have done for our wonderful country.
-
Hello, I have a 1985 Chevy K5 blazer and a 1983 K20. The Blazer, bought in 2004 while I was in the Marines on leave. Did have a 305...
-
some time in 84 they switched. if it is a manual - check the clutch start interlock.
-
I doubt he has a neutral safety switch,didn't read his year and don't remember the break off the top of my head. If the new switch...
-
Craig Nedrow reacted to Ricko1966's post in the thread Power loss with aggressive acceleration with Like.
Things to check,first because it's free and easy.With the engine not running. Take off the air cleaner lid, look down the throat of the...
-
I just swapped my 14 bolt, but I cheated. I found another good complete rear diff with the gears I wanted, and just put new seals and...
-
Yours should be stupid easy,sounds like you've lost a pinion bearing buy both pinion bearings and pinion seal,buy both differential...
-
Only need a couple of "specialty" tools. If you can follow directions, you can do it yourself. If you could rebuild a motor, you can...
-
Crank gear does not need to be removed to install a timing chain but cam gear will have to be unbolted.
