Craig Nedrow's latest activity
-
Sorry for the delay. Im running a Sniper EFI, no numbers but Ive seen other similar builds in the high 500 hp and 600 ft lbs range. -
Craig Nedrow reacted to v3500bigred's post in the thread AC Condenser - Should I use New Or Original. with
Like.
Thanks all, I appreciate the community, glad I found it. I decided to try the new ac condenser (parallel flow) vs the original ac... -
Craig Nedrow reacted to edgephoto's post in the thread AC Condenser - Should I use New Or Original. with Like.
If you need to replace parts because they are worn, leaking or in rough shape than I agree, replace with modern design. If you need to...
-
Craig Nedrow reacted to Finkaire's post in the thread AC Condenser - Should I use New Or Original. with Like.
Either way you go use an Ester oil, PAG is a corrosive and may take out your evaporator FYI
-
Craig Nedrow reacted to Hunter79764's post in the thread AC Condenser - Should I use New Or Original. with Like.
Newer microchannel condensers can reject a lot more heat than a fin and tube style, no myth or rumor to it. I was an engineer for Lennox...
-
Craig Nedrow reacted to fast 99's post in the thread AC Condenser - Should I use New Or Original. with Like.
Agree, except today original rubber parts are 40-50 years old. Would be advisable to replace with barrier hose and all new o-rings...
-
Craig Nedrow reacted to edgephoto's post in the thread AC Condenser - Should I use New Or Original. with Like.
I have converted hundreds of old R12 systems to R134a. I worked as an auto tech back when they phased out R12. Converting was simple...
-
Craig Nedrow reacted to bucket's post in the thread AC Condenser - Should I use New Or Original. with Like.
If the new one you got is the modern crossflow type, it should work better with the r134a.
-
I think a set of 236 peanut ports properly done would the best choice. Depending on your elevation that would dictate the compression. I...
-
Y'all see this?? O.m.g...
-
I have an 86 k10 Scottsdale short bed. I'm the original owner and am in the process of restoring it. It is in the restoration shop and...
-
Craig Nedrow replied to the thread BBC 489 build.Put in the soft plug in the back of the engine, behind the cam, then back on engine stand. Deburred and checked the rings in the bore...
-
-
I would stay away from keith black pistons. By the time you acquire and rebuild any of those heads, you could have just bought better...
-
Oh, and checking on a compression calculator... my L29 after the rebuild should be ~9.15:1 Static compression ratio and ~8.4:1 dynamic...
-
Craig Nedrow replied to the thread 489ci tow build....E-Brock oval air gap intake, headers 1 7/8 tube for chevelle, short duration cam no more then 280 ([email protected]) 750 holly. That’s about...
-
