Craig Nedrow's latest activity
-
I think the green O rings are compatible with R 134. Thats the ones I have used and have not had any problems. I'm not sure on the... -
My 86 is 4:10 rear, and i use low gear 1st alot. Usually around the yard or when towing. Not usually in town just driving around. In...
-
Non synchro first isn’t an issue up shifting. Down shifting on the other hand is where the fun begins. Pretty much have to float it in...
-
Good to know on the clutch. Bummer on the housing... A friend of mine told me the computer should be okay, because 92 was a dumbed...
-
Your existing clutch will work, it's just standard Chevy stuff. I don't think the squarebody bellhousing and slave will fit at all...
-
Okay, good to know. The sm465 is 4wd. Is currently paired with a np208. I have 2 other NP 241s that were paired with a NV4500 and a...
-
I don't know much about the newer body style trucks but I do know the sm465's used in them had the shift tower located a few inches...
-
Craig Nedrow reacted to Ricko1966's post in the thread Need help with my 700r4 TTC wiring harness with
Like.
Why do you want to? The only way I can think of to wire it your light would light when power was applied to the tcc solenoid.But that... -
Craig Nedrow reacted to Matt69olds's post in the thread Need help with my 700r4 TTC wiring harness with Like.
This is the method I used to wire the TCC on my 81 GMC. The only difference, I used a time delay relay I bought from Amazon. It was...
-
Craig Nedrow reacted to Jgonick's post in the thread Need help with my 700r4 TTC wiring harness with Like.
This was my understanding also- I also don't have an EGR (wires are just tied up out of the way.) The wiring diagram you posted is how...
-
Craig Nedrow reacted to Ricko1966's post in the thread Need help with my 700r4 TTC wiring harness with Like.
Hook your low vacuum switch up it will make the truck more drivable without it your converter will lock going into 2 or 3rd depending on...
-
Craig Nedrow reacted to BigSW's post in the thread Need help with my 700r4 TTC wiring harness with Like.
Okay thank you. I am going to hook the vacuum line to a "Timed Vacuum" Port on my Edelbrock Carburetor. So can I just move the EGR wires...
-
Craig Nedrow reacted to BigSW's post in the thread Need help with my 700r4 TTC wiring harness with Like.
I do have the low vacuum switch but not the thermal switch.
-
Craig Nedrow reacted to Ricko1966's post in the thread Need help with my 700r4 TTC wiring harness with Like.
Looks to me like tcc and egr bleed are both picking up power at splice 383 in which case,you don't need to do anything. Hopefully...
-
Clutch Selection This is where I hit a brick wall. I had read several places that you could use a factory clutch setup for the...
