Craig Nedrow's latest activity
-
:welcome:You said you replaced both hoses? Was that both the pressure hoses? Have you checked the spitter valve hose on top of the unit... -
Craig Nedrow replied to the thread 1974 c10 didn’t start-fuel problem?.$400 buck is $400 bucks....but I replaced both tanks, sending units, valve (six way) and cab switch and nary another fuel problem. You...
-
Craig Nedrow reacted to CountKrunk's post in the thread 1974 c10 didn’t start-fuel problem? with
Like.
Might be a good time to give the whole system a once over and make some proven upgrades. That's my plan with all critical systems... -
Craig Nedrow reacted to CountKrunk's post in the thread 1974 c10 didn’t start-fuel problem? with Like.
Rock auto sells some books for these trucks. I got a set from them, like em fine
-
Haven't had any luck with local parts stores. Mostly only use them for fluids. I primarily buy from Rock auto for normal replacement...
-
That's what I read too. But yep, it's not like its a timing set or anything where you have to line up the dots.
-
I believe you are asking whether or not the pinion and ring gear need to be clocked in the way they came apart? If so, then no. Just...
-
Craig Nedrow reacted to Old Guy Bill's post in the thread 10 bolt front differential question with Like.
It would’ve helped to have checked the backlash before removing the carrier also…..
-
Ok, thanks. I was religious about marking left/right on the shims and carriers, so I should be good. I appreciate it.
-
Should be good as long as the shims for the carrier spacing go back how they came out.
-
Welcome from Goodyear AZ but formally from Wexford PA, south of you on 79. I don't miss how things rust there.
-
There still is enough truck there to put it back on the road. 350s are a dime a dozen. Don't let the seized engine stop you. You can get...
-
I am amazed that after 40 years that sunroof doesn't leak. I figured the inside of the cab would be a swamp but even after power washing...
-
Welcome! Motors are cheap. Just saying. Eric
-
Craig Nedrow replied to the thread who can help identify this frame?.The S10 frames are used in many 47-55 1st series trucks, almost a bolt on there is a f-book group dedicated to this...
