Chris64's latest activity
-
Chris64 replied to the thread Rebuilding my dash pad..OK, so gluing went sort of as planned. Here's what I learned: * It showed every little imperfection underneath. Most people put a thin... -
-
Chris64 replied to the thread Rebuilding my dash pad..OK, here's where things stopped going according to plan. Any time I've worked with vinyl cloth in the past, it was on door panels, amp...
-
-
Chris64 replied to the thread Rebuilding my dash pad..Then I started sanding it smooth. The optimal tool for this was a portable belt sander followed up with a block sander. That went...
-
-
Chris64 replied to the thread Rebuilding my dash pad..OK, well I got back to the dash project... I'll share what I learned so far to serve as a warning to others. So I just used contact...
-
-
I'm really amazed that this thread is still going! Thanks to all who have contributed. Taking these old original sliding windows apart...
-
Chris64 replied to the thread Removing instrument panel - dealing with the oil pressure line.I'm running out of plenum for them to have a nest built in and the nice thing about plastic is it can be cleaned. The only area...
-
Chris64 reacted to mtbadbob's post in the thread Removing instrument panel - dealing with the oil pressure line with
Like.
Yeah, me also. I believe it's a 3/8" nut, possibly a 5/16" -
Chris64 reacted to hdchevy's post in the thread Removing instrument panel - dealing with the oil pressure line with Like.
The smaller in length the better for behind the instrument cluster. I have always disconnected from behind. I'm sure disconnecting from...
-
Chris64 replied to the thread Stripping paint off instrument panel.I ended up just painting it flat black which looks identical to the stock lower column cover. Then I used a chrome pen to highlight the...
-
-
Krylon Fusion Matte Blue
-
The vacuum module on the controls diverts vacuum to the right vacuum motors so you get air flow to defrost, heat, vent, A/C. The A/C...
-
Chris64 replied to the thread Debugging my AC problems.I don't know how else to describe the little box with all the vacuum lines that sits behind the climate controller. I call that the...
-
I haven't found any other threads with this specific problem. 1974 K-20 Cheyenne - factory air The problems so far: * Fan speed is...
-
Chris64 replied to the thread LMC AC controller has too many detents.Well I went ahead and installed it as-is because I figured I'm probably not going to find anything better, returning is a hassle and I...
