bucket's latest activity
-
bucket replied to the thread What have you done to your square lately??.Regular duallies with a truck bed got the wide Dana 70HD model. Cab and chassis models (no bed) got the 14ff, but with a narrower track... -
bucket replied to the thread Looking for Mickey Thompson rims.I bought a set in that size when the III's were fresh to the public. I've been happy with them. The finish has actually held up way...
-
-
bucket reacted to Mark Jones's post in the thread What A 500 + HP Peanut Port 454 Looks Like with
Love.
This smooth idle engine went on to run 10.30s @ 3720 pounds in less than sea level conditions. Never under estimate a peanut port head... -
bucket reacted to Mark Jones's post in the thread What A 500 + HP Peanut Port 454 Looks Like with Like.
More pictures.
-
bucket reacted to Mark Jones's post in the thread What A 500 + HP Peanut Port 454 Looks Like with Love.
Bucket showed some interest in the peanut port BBC, here's some pictures and full story behind this 585 HP smooth idle 454 peanut port...
-
Looks like it is a diode. diode 1N4002
-
bucket replied to the thread Journey of a Gen VI 454 Rebuild. Reluctor Ring Issue. Need help!.You should just need a pre-SFI (no reluctor used in those years) balancer. Through '95 should work.
-
bucket replied to the thread 15x10 with 3.5" backspacing?.^^^Oh, that's with the 9" rim with 4.5" backspace. If you pick the 10" rim with 3.5" backspace, you'll probably be better of with a 6in...
-
bucket replied to the thread 15x10 with 3.5" backspacing?.It depends on how you use the truck. If you just street drive it and the most flexing it sees is driveway entrances, then it will only...
-
-
It takes 2 hours porting per head, then the guide and valve job work. Then you're going to have a very responsive high torque engine. My...
-
bucket reacted to Tank6x2's post in the thread What have you done to your square lately?? with Like.
I’m glad we Canadians are now referred to Canadastanians, granted that dimwit of a PM we have up here I understand and agree with the...
-
bucket replied to the thread 15x10 with 3.5" backspacing?.I forgot to state, I used to run the same BDS 4" springs, but with a 16x8" wheel with 4.25" (I think) backspace and 305/70/16's. They...
-
