bluex's latest activity
-
Maybe cuz the front diff isn't always spinning so the bearings dry out and it's rough on them the first few seconds of engagement? Or... -
Backside of the vent Everything looks pretty clean inside considering the schmutz we saw earlier Then took out the 15mm bolts...
-
This is all that actuates the front axle. A little shift fork and collar. Pass side/long side adjuster Driver's side/short...
-
Didn't get any shots mid-pull cuz it was sketchy AF trying to get that thing to balance on the transmission jack while it also rolls off...
-
So then I popped out the drain plug to let it start draining while I pulled the CV axle bolts out Fluid looked pretty good but there...
-
So then yesterday I came up to the shop to work on the front diff since my new bearings from QP didn't show up Saturday like I'd hoped...
-
Ok, so I made a couple adjustments last Friday and forgot to post them. Took .005" off the pinion shim and shifted the carrier to the...
-
On my lunch break I fixed my carrier bearing (I just flipped the pass side over upside down, the driver's side was ok), made a soupier...
