bluex's latest activity
-
Made some more progress last night and today. We lost power at work about 4:15 yesterday, so I took that opportunity to throw in the new... -
Threw the pinion and carrier in. Ran into a snag that no matter what shim combo I ran, once I tightened the caps, everything locked down...
-
So what I finally found was, the GM bearings were quite a bit bigger than the Koyo’s that came in the kit, so they weren’t going down in...
-
So finally, I could check backlash and run a pattern. I have the factory .036” shim on the pinion and both factory shims on the sides of...
-
Happy new Year to all of you :-) Here is my 87 R10 Scottsdale 305TBI/TH400, imported in 2018 Rust Free but worn from GA to Germany, then...
