AuroraGirl's latest activity
-
As voltage goes down amperage goes up. It's ohms law,the contacts on the solenoid get hot enough from the amperage draw that they stick... -
AuroraGirl replied to the thread 1977 P30 hydroboost questions.Even if you just use a turkey baster or battery electrolyte or a 2 stroke mixing syringe (clean, no oil on it) or a brake bleeder tubing...
-
AuroraGirl replied to the thread 1977 P30 hydroboost questions.hows rust on the thing? does your truck have a rear disc but a prop shaft park brake? Or rear drum? if you have drum id still find it...
-
AuroraGirl reacted to LilRobert1367's post in the thread Installing a new automatic choke on verajet carb? with
Like.
No not a conversion. It had electric choke on it stock. I'm trying to get the truck back to stock. It had a diy propane kit on it, now I... -
AuroraGirl reacted to LilRobert1367's post in the thread Installing a new automatic choke on verajet carb? with Like.
@AuroraGirl thanks for the information. That will work.
-
If you are pulling coolant into the compression chamber, when you get it running on 7 cylinders, and you try to adjust the distributor...
-
AuroraGirl replied to the thread 78 k10 starter problem.ive had this problem with insufficient positive connection from the battery to starter (small engine, albeit), and wearing out starter...
-
-
Older engines can leak water into the cylinders if the head gasket leaks around the #5-#6 cylinder and the rusted water jacket ports...
-
AuroraGirl replied to the thread Can someone tell me the length of the z bar/bell crank for an 83 K10, manual clutch?.it may not be a frame issue but they may have broken the stud , bad power train mounts can twist and put them at extreme angles...
-
-
AuroraGirl replied to the thread Can someone tell me the length of the z bar/bell crank for an 83 K10, manual clutch?.Heres a picture of one out of a 1977 K25
-
-
AuroraGirl replied to the thread Can someone tell me the length of the z bar/bell crank for an 83 K10, manual clutch?.i wasnt aware of there being different length z bar bell crank thingies. lol Heres a poor picture of mine, 1980
-
-
AuroraGirl replied to the thread Installing a new automatic choke on verajet carb?.1979 service manual
-
-
AuroraGirl replied to the thread Installing a new automatic choke on verajet carb?.Oh yeah I forgot those came with a varajet starting then.
-
AuroraGirl reacted to ali_c20's post in the thread Installing a new automatic choke on verajet carb? with Like.
Description says 1979 C20 with a 250. Should be L6 and a Varajet 2 if everything is stock...
-
AuroraGirl replied to the thread Installing a new automatic choke on verajet carb?.Is this on a v6 or i4? Do you mean varajet (I or II)
