AuroraGirl's latest activity
-
AuroraGirl replied to the thread gas gauge.it takes a ground. the sender needs to be grounded to the truck frame, and the wire from the sender that goes to the switch yes I would... -
AuroraGirl replied to the thread Engine mount, old or new?.If your engine moves around a lot esp with a broken t case mount(or transmission), you can twist the buckets that those mounts bolt to...
-
AuroraGirl replied to the thread Engine mount, old or new?.https://www.offroaddesign.com/competition-style-motor-mounts-for-73-to-87-gm-small-block-or-big-block.html
-
AuroraGirl replied to the thread K5 Blazer Shift Indicator.You could have replaced the column detect to get the shift indicator working right. But no light source without the original cluster
-
AuroraGirl reacted to 1lejohn's post in the thread LMC truck has the wrong window regulator rollers.... with
Like.
My window regulator broke again. I used a whole new assembly. I've come to hate these trucks power windows. The one roller pulled out of... -
AuroraGirl replied to the thread NP241-C, non VSS. Can I convert to VSS or no. No luck!!.Well it wouldn’t control the signal, it would be internally calculated and thus the input would be the computers own output
-
AuroraGirl reacted to K5 Blazer's post in the thread NP241-C, non VSS. Can I convert to VSS or no. No luck!! with Like.
I am using the holley terminator max. I don't think there is any provision to control the VSS signal.
-
AuroraGirl replied to the thread 700r4 & Edelbrock TV Bracket.the bracket, as long as your engine was originally 4 barrel, is fine, but if your truck was a 2 barrel(305...? no qjet in sight...
-
so the up tips of the bars need to be down? Never seen that.
-
AuroraGirl replied to the thread NP241-C, non VSS. Can I convert to VSS or no. No luck!!.Does the PCM youre using have a provision to adjust the VSS signal or at least disregard it while in 4wd? fords did this, the...
-
AuroraGirl replied to the thread NP241-C, non VSS. Can I convert to VSS or no. No luck!!.do not RTV an O ring
-
AuroraGirl reacted to devildogcummins's post in the thread Replacing rear sliding widow latch on 1987 V10 with Like.
i had trouble finding the right one also, i found my exact one on amazon. OWACH pn#CL-310-1 it says its for a 1984-2001 ford dodge ram...
-
AuroraGirl reacted to fast 99's post in the thread Running unrebuilt original heads? Might need lead substitute above 8500gvw with Like.
Convertors were on lighter duty trucks. Probably the same head but lead would kill cats. In the past I have seen several early heads...
-
AuroraGirl posted the thread Running unrebuilt original heads? Might need lead substitute above 8500gvw in Tech Discussion.this is a 1986 TSB from GM. so over 8500gvw (so C6P 3/4 tons, all 1 tons,) after 1979 need substitute , while anything above 5000 gvw...
-
-
AuroraGirl reacted to bucket's post in the thread What have you done to your square lately?? with Like.
Rain filth is WAY better that the salt/brine devil coating.
