AuroraGirl's latest activity
-
AuroraGirl replied to the thread 700r4 slipping in cold weather.I mean.. if someones never done it before, the roaring 305 would easily cause slippage But the biggest indication there, the speedometer... -
For a second there, I thought you were starting to suggest "hey dummy, were you driving on ice?" :rofl:
-
That is exactly where the oil pressure switch was in my k5. Yours is probably mounted in a 45 degree fitting. My switch was straight in...
-
AuroraGirl replied to the thread Have you checked your ground?.They are easy to check. And they are simple. Sadly sometimes they are hard to find, but the FSM usually has each one pointed out in a...
-
I am a field Service Engineer for a major auto manufacturer. I see so many times where a tech has replaced all kinds of parts. I get...
-
AuroraGirl replied to the thread Have you checked your ground?.
-
So I eventually figured out what the problem was. When it was installed the kick off was behaving normally, pulling in under vacuum as...
-
AuroraGirl replied to the thread Gauge Cluster Swap.Heres the oil pressure sensor for the gauge, sticking up behind my distributor.
-
-
AuroraGirl replied to the thread 700r4 slipping in cold weather.also confirm the truck isnt suffering a severe weather related driveability complaint. you explained enough it does seem to be...
-
Wood floor? All the floor crossmembers and surround flanges are specific to the wood floor and are not reproduced.
-
AuroraGirl reacted to hack_man's post in the thread Are locking hubs factory or personal add on? with
Like.
I'm considering converting my auto locking hubs to Manual. Can somebody please set me straight on the O ring with Mile Marker 104 hubs... -
ATM gmt400 is down. Figured I would give you guys first dibbs. I’m keeping engine and trans and pcm.
-
The single stud didn't go away until about '93. The single stud tops all interchanged for the most part, back to the late 60's. The...
-
AuroraGirl replied to the thread Home Fabricated Parts.interesting this 1987 carbureted 454 truck uses a TBI air cleaner design but with the single center stud. I wonder if it fits on the 350...
-
AuroraGirl replied to the thread Steering Column needs to be rebuild.Clarifying the type of column and a picture of yours would probably help. do you have interest in doing this on your own with guidance...
