AuroraGirl's latest activity
-
I took all the u-joints out but I didn't see a spring anywhere so that must have broken and fallen off or something. I'll look into... -
Looking it up, it seems some say it’s not a big deal, others say it’s hard on, and can wear the lock pins in the case? So pretty much...
-
AuroraGirl replied to the thread Lock ring repair on a steel tank?.Heh I dont know how I ended up on this old thread, but valid question, still curious about the subject :) My dad is getting serious...
-
AuroraGirl replied to the thread CARBURETOR DATED.I forgot which Intake I have but it was only square bore im pretty sure, To aid the heat thing, you can get a heat shield for radiant...
-
-
My truck with NP203 started making loud clicking noises (not a clunk), and it turned out to be the u-joints (rusted, roller bearings had...
-
AuroraGirl replied to the thread Door Gap.You seem to got it now, but the top of the frame simply looks like it just needed some encouraging. You can kinda see where it "bends"...
-
-
AuroraGirl replied to the thread Front end noise.Lets say he kept the driveshaft off it, could one drive it normally in hi loc or would that be super stressful on the case?
-
Since it's a full-time 203, you need to put the shifter into Hi-Loc, in Hi range, it is like an open differential, since you removed the...
-
AuroraGirl replied to the thread CARBURETOR DATED.Can op show us your setup? a stock iron manifold for a qjet with an adapter with the 1406, it would be easy to put a ASV2 on since it...
-
Our Dear Friend Paladin is telling me to say something about a.........Holley. :waytogo:
-
AuroraGirl replied to the thread CARBURETOR DATED.Can you take a picture of the carburetor without the air filter on right before you crank it up? Then set the filter on, then attempt to...
-
Okay. That's your axle Shaft U-joint. The pinion yoke is where your front axle meets the front driveshaft. With full time hubs your...
-
AuroraGirl replied to the thread Front end noise.if you werent in LOC then having a slight delay itself may not be an issue but the speed difference may not be odd.. you had all 4 in...
-
AuroraGirl replied to the thread 85 GMC Engine Wiring Questions.Is the accessory drive from the 60s or is it match? The 60s had a different approach to the accessories because of mounting holes and...
-
AuroraGirl replied to the thread Sirius/XM "Roady" with original GM truck radio.It looks like any cassette adapter with a 3.5mm (maybe 2.5mm?) jack could work in place of the original? The only 2 things about...
-
