AuroraGirl's latest activity
-
The weak points of the 208/241 (C,DLD,DHD) are really the cases themselves. The internals are plenty strong. The 241C are pretty much... -
AuroraGirl replied to the thread Blower motor wont turn off.you could also just switch over to the wiring/electrical from a 1982 or newer square. I think, but i could be wrong, the necessary...
-
-
I had a similar problem on my k10 diesel when i got it. A PO had put a PS pump with an AC double pulley on it with a non AC crank pulley...
-
They also make a great entry mat to a shop or garage entry door. So I'd say there is some value.
-
AuroraGirl replied to the thread How to ID 16" 8 bolt wheels?.I put my m18 small milwaukee impact with a 3/4 adapter in the chuck and then use my 22mm deep well impact socket i use to do the lug...
-
I totally understand! I'm pretty much in the same boat.....and I don't have any kids to feed (other than the truck which I call my metal...
-
Could be. They look kinda like what came on my truck. You would have to look them over to find the stamp to be sure though.
-
Yeah, those should work just fine. Your studs are 9/16".
-
That's for an entire trim set, correct?
-
AuroraGirl replied to the thread Mud Tires.Is there value in a single vintage mud flap? Or only as sets?
-
AuroraGirl replied to the thread Mud Tires.Im Jealous Lol
-
Shoot, that truck is rust free for the salt belt! Beautiful rig! What part of Cheeseland you in? Cooper Evolution MTs are a good mid...
-
AuroraGirl replied to the thread 6.0 NV4500 K30 swap.the 241 drops the opposite direction as the np208, at last as they came in chevys And the np208 has a smaller 4lo ratio The 241 has...
-
AuroraGirl replied to the thread How to ID 16" 8 bolt wheels?.I wasnt clear enough, The plastic black nuts on the caps gmt800 and gmt400, are m27x2.0 If they werent for some reason you can buy new...
-
-
The lug nuts are 14mm threads on the GMT 400, 5 lug and 8 lug. The difference between the lug nuts on my Burb and my crew cab is the...
