AuroraGirl's latest activity
-
AuroraGirl replied to the thread Best way to transport 19 55 gallon barrels?.not sure how this woiuld help but putting it out there -
-
AuroraGirl reacted to Ricko1966's post in the thread Best way to transport 19 55 gallon barrels? with
Like.
You can do 4 standing up with three on top in the truck that's 4 bottom upright 2 sideways on top 1 on top of that 2 upright on top of... -
AuroraGirl replied to the thread Best way to transport 19 55 gallon barrels?.I am not opposed to it, I was just worried if that was going to be some special consideration for securing the load And that trailer...
-
AuroraGirl replied to the thread Best way to transport 19 55 gallon barrels?.I should install a stake pocket thing unless the front stake pockets have a opening like the rears do
-
AuroraGirl replied to the thread Best way to transport 19 55 gallon barrels?.
-
-
AuroraGirl replied to the thread Best way to transport 19 55 gallon barrels?.Damnit can you crunch the math on if i use my gmt800 which is the 6.5 tailgate down with toolbox, and then my trailer which is 10 ft...
-
AuroraGirl replied to the thread 3 on the tree to sm465 conversion questions.your cab might not have a coveer which can be removed without cutting So if you get a cover, you can cut it with that as a template
-
AuroraGirl replied to the thread 3 on the tree to sm465 conversion questions.its 5 with a granny low so my bad I Thought it was 6 speed, But isnt the nv trans only 4 with a granny low? Although they do sell more...
-
AuroraGirl replied to the thread Best way to transport 19 55 gallon barrels?.alternatively I can use my f150 and that gives me 8 feet plus tailgate if I remove the toolbox, I just will be a little uncomfortably...
-
-
AuroraGirl replied to the thread Best way to transport 19 55 gallon barrels?.So im growing open to this, should I remove my tool box Im dealing with 6.5 ft of bed , thats about 8.5 with the tailgate down But its...
-
AuroraGirl replied to the thread 3 on the tree to sm465 conversion questions.6. Tremec
-
I'm glad you're asking these questions because I've never had a good idea of what I have in terms of year, so this is helpful. Attached...
-
AuroraGirl replied to the thread Engine stabilizer bar.what I was going to say, there needs to be an extension of the rods purpose, which is to spread out and distribute some of those forces...
-
Unless it is bolted in 3 places or bolted in 2 and welded it won't be much if any better than eliminating it. If only 2 bolts are used...
-
