ali_c20's latest activity
-
The rubber lip on the outside of the outside window bottom seal laps over the top edge of the window opening/sheet metal. If that’s what... -
ali_c20 replied to the thread Gas to Diesel swap, question on fueling.With a 6 port pollack style tank selector valve. The return lines a switched simultaneous with fuel lines.
-
ali_c20 replied to the thread GMC Hood Ornament.Some red pigments are very sensitive to sunlight. They break down and completely "disappear" The plastic is clear and the paint is...
-
Loving the hot glue masking idea!!
-
ali_c20 replied to the thread GMC Hood Ornament.I restored my Cheyenne emblems and the Camper Special emblems for my C20 with One shot paint...
-
-
Well the good news is, you qualified for the Axle Hall of Shame Award.
-
Thanks Grit This truck is new to me and I’m suspect of the guy who had it before me. Some things he did great somethings are cheap and...
-
ali_c20 replied to the thread New to the Forum.Welcome from Austria. Cab and top of door. Top of door is often not used, the cab side weatherstrip is enough to keep the water out...
-
^This doesn’t make sense to me. First, a 1981 Chevy has fuel being pulled thru the tank valve. Like every other truck before efi...
-
Excellent... thanks!
-
If most of the connectors are good or you can be replaced with something else you have on hand, you could use one of the universal kits...
-
Can anyone please tell me the thread and length of the 3 screws that mount the wiper motor in a 1984 C10 Scottsdale?
-
ali_c20 replied to the thread Wiper Motor Mounting Screws '84 C10.10/24 ×1 These are special bolts with a taper and star washer to center the grommet. You can get kits with grommets and bolts. The ebay...
-
New here, moved over from the GMT400 group. Have an 85 C10 swb “odd ball”; shipped with a Qjet equipped 4.3L V6, Th400, 2.73 gears, van...
-
ali_c20 replied to the thread Hello from SW TN.Welcome from Austria.
