75gmck25's latest activity
-
75gmck25 replied to the thread Do I even need a gas tank vent tube?.Blazer and Suburban tanks will fit if you have no spare tire. Not sure the big 40 gallon Suburban tank will work, but smaller tanks... -
75gmck25 replied to the thread Instrument cluster questions on new build.Oil pressure sensor should be the same for all the engines. Pressure is pressure. Temp sensor might be different, but I think they are...
-
75gmck25 replied to the thread Weird solenoid looking thing.Some vapor canisters are much simpler than the one in the picture. My ‘75 has one hose to the gas tank vent and one hose that used to go...
-
75gmck25 replied to the thread Dash Pad Help.This is the new dash pad (Dashes Direct from Jegs) and the new seat foam and cover from LMC. Didn’t buy the dash pad from LMC because...
-
-
75gmck25 replied to the thread TH350 issues.Vacuum modulators come with different color stripes. IIRC, green seems to be the most common, and red stripe has an adjustment screw to...
-
75gmck25 replied to the thread Bench seatback foam from LMC - anyone else installed it?.I got the seat back and cushion foam installed, along with new original design set cover. I apologize for the long answer. :) Seat back...
-
75gmck25 replied to the thread Under Dash Wiring Mystery.GM used the orange wiring for circuits with constant power, like the interior lights, cigarette lighter, etc. If there is a white wire...
-
75gmck25 replied to the thread Electric fuel pump.Lots of good suggestions, and I agree that it’s probably not vapor lock. If there is a return line, you have a 6 port tank solenoid...
-
75gmck25 replied to the thread Avs2 problems.As already mentioned, check carefully for vacuum leaks and/or hoses off. Make sure the throttle moves smoothly and the linkage does not...
-
75gmck25 replied to the thread OEM cylinder head castings - 1977 K10.Quite a few original 350's were replaced by Goodwrench 350's, usually purchased from the local dealer. The Goodwrench engines were...
-
75gmck25 replied to the thread Avs2 problems.What part do you have to adjust?
-
75gmck25 replied to the thread 82 c10 305 all sensors and locations..You can get it running with just the two sensors. You can leave the ESC in place and it will probably work fine, but swapping to a...
-
75gmck25 replied to the thread No power at all, zero lights, guage lights, or anything else. Any help wld be great..On the OEM starter there is a large lug where the positive battery cable is connected. - On that same lug there is also a red wire (at...
-
75gmck25 replied to the thread AFR gauge installation.Is it a wideband gauge, and does it have a heated sensor? No heated sensor - usually needs to be within a few inches of the collector...
-
75gmck25 replied to the thread New to the square body scene.The specific carburetor number is on the side of the carburetor - for your 80's truck it would be something like 17080213. Then go to a...
