molus
Latest activity Postings About
-
-
molus replied to the thread LMC Dash Pad Supplier.I got mine from summit but here’s the supplier... -
-
Been working on this 85 for a year now. Started out as a 2500. Swapped body and drivetrain over to a SWB 1500 frame. Just need a vision...
-
molus replied to the thread LMC Dash Pad Supplier.Another cheap option for people is coverlay for around $150. I’m pretty happy with the results. I used a dash filler compound, sanded...
-
-
I thought I remembered Engine Masters doing an episode on this stuff, if the performance aspect matters to ya.
-
molus reacted to SquareRoot's post in the thread Opinion thread- 81 silverado grill you like or ? with
Like.
You could put one of those slat billet type phantom grills in? Just kidding. Even the blind hate those! Apologies to the blind. -
molus replied to the thread after doin front end clutch and steering column,truck feels like its in 4wd.Old brake lines breaking down, they swell and let fluid through due pressure applied but won’t relax enough to let the pressure back out...
-
molus replied to the thread Finding smog pump 1985 Chevy K20.If you get really stuck I have a full set I’ve just pulled off an 83, you’re welcome to have it for free but you’d have to cover...
-
For a 10.5 ff axle, absolutely. For the 9.5 sf not so much. Both axles are referred to as 14 bolts, but totally different beasts.
-
The only selectable locker for your differential is an ARB part RD197 You’ll also need to purchase an air compressor to run it.
-
molus replied to the thread What locker shall I go for?.I would suggest an air locker or e locker. These units run as an open differential until selected, then both wheels have drive. This...
-
I took it off today and saw one word on it: Moroso. So googled Moroso and found it. Then tossed it.
-
I have an '82 VIN card handy and the GVW/Brake system is coded in the VIN. Character #4:
-
As usual, great info by @Keith Seymore and @Bextreme04 !
-
This and what you said before makes it a 8600gvw truck. Proof? Likely none of us know the NZ requirements so kinda on your own there.
-
Well done, Bextreme. I see my work here is done. Heritage Center contact info:
-
-
Loading…
-
Loading…
Latest posts
-
-
-
-
-
Can't decide what to do. Suggestions? Thoughts?- Latest: Craig Nedrow