-
-
Normal choke operation. I believe there's two steps. The high idle has an adjustment screw on the choke side of the carb. I guarantee... -
cbrown5385 replied to the thread RPM sticking sometimes..I’m also not sure if this is part of the issue but at first start up this thing SCREAMS! Then if I tap the throttle it’ll bump it down...
-
cbrown5385 replied to the thread RPM sticking sometimes..I’m going to have to watch the linkage and the choke I thought I had the choke adjusted well, but the stuck linkage or cable would make...
-
Possible throttle shaft. Personal experience, truck ran great, high idle when cold was perfect, idle at operating temperature was...
-
Choke linkage on the carb, throttle cable binding, look and ye shall find???
-
I’m having a slight problem I have 86 k10 with a carbureted 350. Every so often when just crushing and pulling up to and intersection...
-
Hey guys is it possible to wire a fuel cells level sender into the stock gauge?
-
So I’m having fuel supply issue. I’m thinking I have a plugged fuel supply line. I have an electronic fuel pump mounted on the frame...
-
cbrown5385 replied to the thread Does any one know what had a similar banjo as this?.Any idea what year and model that exact fitting would have come on?
-
cbrown5385 posted the thread Does any one know what had a similar banjo as this? in Suspension, Steering & Brakes.Does any one know what had a similar banjo as this? Very hard to locate. It came off an 85 c10 but I can’t find the replacement
-
-
-
Loading…
-
Loading…
