K
KCKKen
Latest activity Postings About
-
-
KThat’s hilarious mine is a loaded sierra grande with all the same options, I only bought mine due to how unique it was and the body was...
-
KKCKKen replied to the thread Upper A-Arm Mounts: Replace Studs or Replace Bracket?.Hi Everyone! After battling a couple of medical issues I'm about to get back to the 85 GMC. First thing is to have the frame and front...
-
KI bought a tall lift bendpak (70") for the same reason as RanchWelder. Mine is offset, and is is still a bit tight getting in and out...
-
KThere's a booklet published by Automotive Lift Institute that you can get from lift suppliers that show the lift points of all the makes...
-
KI have a two post 10,000# Challenger lift in my shop, I have no regrets. Benefit of a two post is the ability to do wheel end...
-
KGood morning everyone Its with a sad heart i have some bad news, but good news at the same time. Our beloved friend and fellow...
-
KKCKKen reacted to NickTransmissions's post in the thread TH400 Slipping When Warm - Chunks in Oil Pan with
Like.
You're welcome. Looks like a combination of bronze thrust washer which sits on the front side of the rear planet and front/rear... -
KKCKKen reacted to NickTransmissions's post in the thread TH400 Slipping When Warm - Chunks in Oil Pan with Like.
Yank it out and overhaul it! Debris like that in the pan = rebuild 100% of the time. check out my TH400 Information Thread for video...
-
KDidn’t ask about the prep in the first round of questions but noticed you said all on how you prep so figured I’d ask. Truck most likely...
-
KThese turned out great! I did mine in Argent Silver 2K Urethane, anything 2K should hold up to gasoline and other chemicals. I also...
-
KI epoxy primered the whole thing then used Rhinoliner on the bottom halves because I got rid of those plastic liners that hold junk...
-
KThis is the terminal here simply broken off from the charge wire, if I’m remembering things correctly.
-
KStandard equipment on Crisislers. Might be a good pair for your non fusible link
-
KI’d go 1/8 by 1/8. That might blow before the truck melts!
-
KYou can buy fusible link at any box auto parts store in the electrical isle. It should be 2 sizes smaller than the wire it is protecting.
-
-
Loading…
-
Loading…
