-
-
RaysnCayne reacted to Matt69olds's post in the thread 1987 R10: TH400 to 200-4R swap (mostly wiring??) with
Like.
The computer won’t care if the kickdown wire is disconnected. Somewhere there is a switch on the carb or throttle that sends power to... -
RaysnCayne replied to the thread 1987 R10: TH400 to 200-4R swap (mostly wiring??).I'm familiar with wiring up the manual lock-up switch, Matt. I just want to know if unplugging the factory solenoid detent wire (and...
-
RaysnCayne replied to the thread 1987 R10: TH400 to 200-4R swap (mostly wiring??).Thanks Nick. So if I leave the wire to the detent solenoid unplugged (I'll just cap it and tie it off out of the way), that won't...
-
RaysnCayne posted the thread 1987 R10: TH400 to 200-4R swap (mostly wiring??) in Transmission & Transfer Case.While the OG 305 TBI/TH400/3.08 10 bolt in my 87 R10 does okay buzzing down the highway between 71-74mph at 2800rpm, I'm just not...
-
Yes, a 200-4R has a longer pan and a deeper pan than Th350. Not that it matters much unless you want to be politically correct since...
-
-
Loading…
-
Loading…
