1lejohn's latest activity
-
To prevent PCV issues, buy the GM or dorman driver side valve cover, and put the revised PCV to work. Also, a catch can if you want to... -
1lejohn reacted to Soundmound's post in the thread What have you done to your square lately?? with
Like.
In the last two weeks I have had the transmission repaired/serviced and sealed. I had the exhaust replaced from the Y back with 3" and a... -
I definitely agree with the Kilmat on the outer door panel. You don't need to use a lot, there or anywhere else. I put one sheet inside...
-
Do you mean the "fly's eye" air cleaners? I think they look cool, but they are a terrible fire hazard if there's ever a backfire.
-
Another option is to modify a 4-hole adapter into a split open. It could be the best of both worlds. I made this one to test with, but...
-
1lejohn replied to the thread Lifter tick?.They are inherently noisy. I have a tick on my 85. It has retrofit rollers and a mild GM cam. The noise has been there since day one of...
-
1lejohn reacted to PrairieDrifter's post in the thread never jerk a stuck truck with a chain with Like.
I'm not saying it can't be done. Like I said, frowned upon. I have one of the d ring receivers. Much handier, especially in the freezing...
-
Mine has 4" Skyjacker C140S softride front springs, ORD HD front greasable shackles, 4" lift blocks in the rear with factory springs...
-
1lejohn reacted to Ajax19's post in the thread What have you done to your square lately?? with Like.
Chasing day light but got it welded together enough to pull off and finish it on the bench supposed to start raining here soon so I was...
-
1lejohn replied to the thread What have you done to your square lately??.Replaced the driver's side header gasket. It had been bad for a while. The truck sounds so much better now.
-
-
I got the brush guard mounted over the winter, and finally got the truck outside for a picture. It was certainly worth the modest...
-
Just installed a Luverne brush guard on my truck. It only had two of the original 7/16"-14 cage nuts. I kept those on the top of the...
-
Not a full brush guard, but I like it. If I come across a CUCV guard it's going on the burb.
-
1lejohn replied to the thread 1976 Chevyvan G30 stiff accelerator pedal.My throttle pedal is also a workout for my right leg. On my application I think it's the angle the cable is in to reach the carb.
-
1lejohn reacted to Ajax19's post in the thread What have you done to your square lately?? with Like.
Fought the old bolts for a bit then test fit one side still gotta drill the holes in the bumper to 5/8" but I'm liking the look so far
