Turbo4whl
Latest activity Postings About
-
-
5/8" hose from the intake to the lower heater core inlet 3/4" out to the pump or the radiator -
Turbo4whl replied to the thread Heater Hose Routing.
-
-
Turbo4whl reacted to Broken85's post in the thread One more electrical plug identification with
Like.
Green is definetly Water temp. The three prong goes to the oil pressure sending unit behind the distributor, but the sending unit only... -
Turbo4whl reacted to Ricko1966's post in the thread One more electrical plug identification with Like.
At the distributor it's 1/8th 27 npt.
-
Turbo4whl reacted to Ricko1966's post in the thread One more electrical plug identification with Like.
Are you sure there are three contacts I only see 2 in your pic. I think dark blue and light blue share 1 terminal and pink goes to the...
-
Turbo4whl replied to the thread Magnetic Block Heaters, Gas Engine?.No experience with oil pan heaters. I would recommend a tank type coolant heater. Zero Start is a good brand: CLICK HERE
-
-
You know what my Dad told me once ? If you really want to know whats going on with a thermostat, you absolutely must put it in a pot of...
-
The rear mounts were easy. Square body cabs have the mounts inboard from the frame rails. I made a cross member and welded it in place...
-
This is my truck. I lost my old login credentials so I started a new username. I still have it and it has just under 300k on it. Folks...
-
Turbo4whl replied to the thread Square body on new chassis?.Welcome to the forum Jared. The thread poster (Joe) has not been around for over 4 years.
-
Turbo4whl replied to the thread Project is stalled. Cannot solve brake problem.I did not know this was a conversion from manual brakes to booster brakes. Other parts may be needed. Did you add the firewall bracket...
-
Turbo4whl replied to the thread Project is stalled. Cannot solve brake problem.So the next step is back at the proportioning valve. There are 2 types, after you remove the rubber cap on the end of the valve you will...
-
-
Turbo4whl replied to the thread Project is stalled. Cannot solve brake problem.If the rear brakes shoes are not adjusted out to the drums, then you will have trouble bleeding the rear cylinders. Remember the (self)...
-
Turbo4whl replied to the thread Odd Cooling System issue.Two things, if you can see coolant returning to the radiator from the heater core, your coolant level is low. My guess, the new...
-
Turbo4whl reacted to HotWheelsBurban's post in the thread Southeastern GM Truck Nationals.......... 2025 with Like.
In our younger days, we'd make a run like that, straight through. Now we'll stop every couple of hours to walk around and make a pit...
-
-
Loading…
-
Loading…
