-
-
mcarlo86 reacted to PrairieDrifter's post in the thread monojet i6 drinking gallons at idle with
Like.
If you know the fuel pump is wrong the distributor is swapped and the carb is junk then you're just here to get the magical "nothings... -
We may expand our search to gas suburbans. A SBC with an OD 4 spd will be easier to find. Gas mileage will be 25-30% worse, but I’m not...
-
Yes, I realize that too. Just because a manufacturer designs something for a specific use, doesn't mean that it doesn't work in other...
-
Yes, I realize that. But in the real world of daily driving, offroading and towing heavy loads, the 285/75 works perfectly fine on a GM...
-
mcarlo86 replied to the thread Looking to buy our first 6.2.Another thing to look for is the starter brace. If it is missing, the torque from the starter can break the engine block where the...
-
mcarlo86 replied to the thread Looking to buy our first 6.2.You are correct about the harmonic balancer. Whatever one you end up getting, changing the harmonic balancer would be one of the first...
-
Most of the 6.2 4x4 burbs I’m seeing are lifted. If a lifted unit is purchased, I will be returning it to stock height. Trying to be...
-
454, 4:10 205 14FF rear D44 front lockers in both. we have seep hills, truck does well here.
-
I've got the welder I've got this welder, except without the digital screen. My cousin is a professional welder, and he recommended it...
-
mcarlo86 reacted to DoubleDingo's post in the thread Double Dingo's 1965 3/4 Ton "Crusty Biscuit" with Like.
A change in plans. Since @idrivea2002golf removed his front suspension from his '81 C20, I am working with him to take it off his...
-
I have a 1975 stepside I bought with a 1968 327 in it. It has 083 heads with bent intake valves. I’ve done quite a bit of research and...
-
Thank you for your replies i’m not looking for big horsepower, just something strong to pull the old truck around. There is evidence of...
-
cool truck and engine, once you get it ironed out you'll have good running setup
-
mcarlo86 replied to the thread 1968 327 in a 75 stepside.You should sell me that pickup and find one with AC since you are in TX. ;) No seriously, that is a great looking pickup and...
-
mcarlo86 replied to the thread OE Wheel size?.15x8
-
-
Loading…
-
Loading…
