-
-
BBloodhound1981 replied to the thread POR 15 equivalents?.I wire wheeled and flap disked to bare metal, and followed their directions. This was in 2017, it has held up perfectly.
-
-
BBloodhound1981 replied to the thread ****CAUTION, PLEASE READ****.Agreed! Face to face with cash is what I always say. I was just sharing one I expected to be a scam but chose to entertain that worked out.
-
BThe ENTIRE C20 cross member is about 12 bolts and it drops right out as an assembly.
-
BBloodhound1981 reacted to CCHEVAL1974's post in the thread Topic for GMC Sierra California Sundancer owners with
Like.
Hi, I had to walk to the public parking lot where I park it. I found several stickers, the last one is the SPID. -
BBloodhound1981 reacted to Keith Seymore's post in the thread Topic for GMC Sierra California Sundancer owners with Like.
If you connect tell him I said "hi". He might not remember me but I have good memories of him and his family. K
-
BBloodhound1981 reacted to Keith Seymore's post in the thread Topic for GMC Sierra California Sundancer owners with Like.
I may have known the Heritage Center was relocating. It was too small before it even opened, with most of the vehicles being stored at...
-
BBloodhound1981 reacted to CCHEVAL1974's post in the thread Topic for GMC Sierra California Sundancer owners with Like.
Hi, the GM Heritage center has found for me 3 new pictures (thanks a lot John Kyros from the GM archives) with this message : "Not much...
-
BBloodhound1981 reacted to CCHEVAL1974's post in the thread Topic for GMC Sierra California Sundancer owners with Like.
-
BBloodhound1981 reacted to Keith Seymore's post in the thread Topic for GMC Sierra California Sundancer owners with Like.
I see the letter is from Gerry Compagnoni. I used to work with him. I think there were four brothers with that same last name. It was...
-
BBloodhound1981 replied to the thread POR 15 equivalents?.KBS Coatings https://www.kbs-coatings.com/?srsltid=AfmBOoqlw7gk1EiIk5zTyUNl4kjuQB_YkpZ6VUjLjibYsat9dxUmiEXL
-
BBloodhound1981 replied to the thread ****CAUTION, PLEASE READ****.I did something I would tell everyone else not to do, and luckily it all still worked out, which is nice. I have had a set of stainless...
-
BI put a piece of insulation in one of the roof bays and that completely stopped the condensation in that bay...I guess the concept of...
-
BYeah I wouldn't do a single thing until you get the window in it. Once that's in, wipe everything down and put some of those moisture...
-
BMostly- but that humidity can come from a lot of places. Condensation mostly happens on surfaces that are colder than the moist air...
-
BCondensation comes from moisture in the air- humidity or fog. If you seal the insulated areas off from the air well, you won’t have any...
-
-
Loading…
-
Loading…
Latest posts
-
-
-
-
-
Update: The surging stopped....took me by surprise- Latest: backwoodsman