-
-
Nnolanswiger reacted to mtbadbob's post in the thread Please look over my emissions “delete” with
Like.
I'd also unhook the cruise control rod, just to make sure it's not opening the throttle, as @Ricko1966 was suggesting. -
Nnolanswiger replied to the thread Please look over my emissions “delete”.Again man thank you it’s first time I’ve dived this deep into something, have a good rest of your day.
-
Nnolanswiger replied to the thread Please look over my emissions “delete”.Hey man I now you mean well and want to help but I don’t want to share information like this, I’m going to ask someone I know if they...
-
Nnolanswiger replied to the thread Please look over my emissions “delete”.It most definitely running at 4 grand or at least around there. Unless again I almost close the choke.
-
Nnolanswiger replied to the thread Please look over my emissions “delete”.Right now it’s 60 degrees, I don’t see any screws to adjust. I did open it 1/8 and it seemed to stop blowing black smoke but then again...
-
Nnolanswiger replied to the thread Please look over my emissions “delete”.I should’ve clarified I’m turning it off after 10-30 seconds because it’ll continue to rev higher if I do t and don’t want to damage...
-
Nnolanswiger replied to the thread Please look over my emissions “delete”.Nothing I can see with a visual check, I shoved a screw drive in the choke so that it would stay shut and it idles at maybe 500-600 rpm...
-
Nnolanswiger replied to the thread Please look over my emissions “delete”.Okay I hooked the distributor to the manifold vacuum and it seemed to idle higher than before. I end up shutting it down after it revs...
-
Nnolanswiger replied to the thread Please look over my emissions “delete”.The egr system failed in some way (most likely smog pump) and I didn’t really want to have to deal with the mess it creates in the...
-
NHello I’ve recently removed emissions components and wanted to make sure (a,) I removed the right ones (b,) they are plug/installed in...
-
-
Nnolanswiger replied to the thread Please help with very high idle 3500-4000.Okay good to know thank you very much.
-
Nnolanswiger replied to the thread Please help with very high idle 3500-4000.Yes I do.
-
Nnolanswiger replied to the thread Please help with very high idle 3500-4000.Found the wires they are $21 on rock auto the part number is ngk 51355
-
Nnolanswiger replied to the thread Please help with very high idle 3500-4000.Thanks for all the advice! The spark plug wires were from rock auto they are ngk I don’t know a part number im currently away from the...
-
Nnolanswiger replied to the thread Please help with very high idle 3500-4000.Yeah I definitely messed up thanks for all the advice the truck was already screwed up badly before all the mess I created. Again this...
-
-
Loading…
-
Loading…
