Buicknut
Latest activity Postings About
-
-
Buicknut reacted to Bennyt's post in the thread Steering box frame reinforcement weld in plates with
Like.
I've installed 3-5 of these on both K's and C's(off the top of my head 2 77's and an '89) over the years and never had to relocate... -
Buicknut reacted to dragstews's post in the thread Steering box frame reinforcement weld in plates with Haha.
Did give this some thought ... Very well made and easy to install but ... On the 75 K15 the brake-proportion valve is mounted right in...
-
Buicknut reacted to CalSgt's post in the thread Steering box frame reinforcement weld in plates with Like.
This ^^^ The brace is more valuable than the patch kit on an unbroken frame.
-
Buicknut reacted to Bennyt's post in the thread Steering box frame reinforcement weld in plates with Like.
Besides the plate, and bolt-on brace...you might find some rivets have loosened up in the crossmemeber. If you drill them out and...
-
Buicknut reacted to nvrenuf's post in the thread Steering box frame reinforcement weld in plates with Like.
Cracks at the steering box were just about standard equipment, I'd put the bolt on brace on the truck as well.
-
Buicknut reacted to dragstews's post in the thread Steering box frame reinforcement weld in plates with Like.
My frame was in good shape, went ahead and bought the plates just to keep it that way .. Guess it's overkill, but is a good place to...
-
I'll bet they also work good when your fored quits running
-
My best friend works for a large Ford dealership. He’s the owners main guy, they buy and sell all kinds of collector cars...
-
Thanks, yes I think this was done up by the Chevy dealer. The original owner told me the bought it after they saw it spinning around on...
-
LMC.
-
Those may be "original" to that truck, but they're not GM seats. If the truck was "done up" at a dealer or one of those conversion...
-
Lol, I just mentioned Phoenix Graphix in another thread. Although I misspelled it. They've been around for a long time. From what I...
-
Buicknut reacted to QBuff02's post in the thread What gauge size/diameter to replace stock ?? with Like.
I used 2 5/8" autometer gauges on mine, used an appropriate hole saw to drill the tubes off the bezel and a deburring tool to fine tune...
-
Buicknut reacted to Rumbledawg's post in the thread What gauge size/diameter to replace stock ?? with Like.
if your talking about these gauges, then ya, Mike is right, 2 1/16". as you have to irrevocably modify your cluster, i would suggest...
-
Buicknut replied to the thread Nice 81 Suburban K1500.I hope someone here buys it to give it the love that it needs.
-
-
Loading…
-
Loading…
