Window and Door Seals Shopping

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
I'll answer that myself, no. The front set does not match the last 2 doors, there is no way in hell.

You're right. They are way differant. Do let us know what you find out. Take pics too. I'll be expecting a write up on this 89S. :High 5:


:grd:

:popcorn: :popcorn: :popcorn:
 

dhamp

Full Access Member
Joined
Jan 18, 2011
Posts
1,170
Reaction score
18
Location
Atlanta Area, GA
First Name
Derek
Truck Year
1987
Truck Model
R-10 Custom Deluxe
Engine Size
350
You're right. They are way differant. Do let us know what you find out. Take pics too. I'll be expecting a write up on this 89S. :High 5:


:grd:

:popcorn: :popcorn: :popcorn:

I SHOULD have done one, but it was one of those things that started out around 7PM as a "hmmmm....lemmee see if it'll just pop in in like 5 seconds", but turned into working about an hour past dark to finish it up. Couldn't take good pics and didn't have the "good" camera with me outside since I wasn't actually planning to install it. :sorrysign:
 

dhamp

Full Access Member
Joined
Jan 18, 2011
Posts
1,170
Reaction score
18
Location
Atlanta Area, GA
First Name
Derek
Truck Year
1987
Truck Model
R-10 Custom Deluxe
Engine Size
350
Are there specific left and right for these doors? I got some from A1 auto, and the Pin in the top stripping would not meet up with the location on the door.

Mine were different J86. There's a metal pin that attaches at the top front corner. The orientation of the pin mirrors from left to right.
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,772
Reaction score
6,636
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
Well, my priority is the front doors, so I wll start with them and go from there. And I might even skip over the rear side doors and go right to the barn doors in the back, they need new seals in a bad way. That will be part of the rear crossmember project I guess that I am not looking forward to at all, lol...
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
My 84 needs door rubber and window felts bad. I can't hear the stereo over the wind noise t anything over 50mph.
 

CaliDude76

Full Access Member
Joined
Jul 30, 2010
Posts
355
Reaction score
179
Location
NorCal
First Name
Sal
Truck Year
Nineteen Eighty Four
Truck Model
C-Ten (Custom Deluxe)
Engine Size
Three Fifty
My 84 needs door rubber and window felts bad. I can't hear the stereo over the wind noise t anything over 50mph.

X2... but black electrical tape does wonders for impromptu sealers... my wing windows whistled, and lined it with the tape.. and it really hushed it down..

Could be singing to the choir on this.. but it worked for me :)
 

CaliDude76

Full Access Member
Joined
Jul 30, 2010
Posts
355
Reaction score
179
Location
NorCal
First Name
Sal
Truck Year
Nineteen Eighty Four
Truck Model
C-Ten (Custom Deluxe)
Engine Size
Three Fifty
You're right. They are way differant. Do let us know what you find out. Take pics too. I'll be expecting a write up on this 89S. :High 5:


:grd:

:popcorn: :popcorn: :popcorn:

me too x10
 

Forum statistics

Threads
44,167
Posts
950,746
Members
36,282
Latest member
Doug Hampton
Top