Water leaking into cab

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

83 K20

Junior Member
Joined
Jun 19, 2017
Posts
21
Reaction score
3
Location
New York
First Name
Billy
Truck Year
1983
Truck Model
k20
Engine Size
350
I have water leaking in through my kick panel and was wondering if the water was supposed to be passing through there because I know people replace them with speaker i replaced the stripping on the hood to the cowl and around the hindges
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,819
Reaction score
3,400
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
It might be originating from the windshield
 

donnieray

Talks to dogs and trucks.
Joined
Oct 23, 2014
Posts
619
Reaction score
517
Location
Roanoke Rapids NC
First Name
Donnie
Truck Year
84,85,86.
Truck Model
86 C10, 84 K10 MM7 NP833 option truck, 85 K10.
Engine Size
350,355;350.
On my 84K10 the weather strip on the backside of the kick panel passenger side had deteriorated and was allowing water into the cab through the vent opening. I replaced it with some high quality stripping and sealed it up. Hasn't leaked in two years.
 

Tank6x2

Supporting Member
Supporting Member
Joined
Mar 27, 2017
Posts
837
Reaction score
708
Location
Edmonton Alberta Canada
First Name
Kurt
Truck Year
79/86
Truck Model
C30
Engine Size
350, TH400.4:10 gears 2WD
Check your windshield tray below the cowling that’s there, once had a hole in my old unit rust through plugging up full of pine needles, but likely hood is slim I’d lean towards the window seal like previously suggested
 

83 K20

Junior Member
Joined
Jun 19, 2017
Posts
21
Reaction score
3
Location
New York
First Name
Billy
Truck Year
1983
Truck Model
k20
Engine Size
350
my question is that if water is supposed to run in between the kick panel and the outter part where the blower motor is
 

83 K20

Junior Member
Joined
Jun 19, 2017
Posts
21
Reaction score
3
Location
New York
First Name
Billy
Truck Year
1983
Truck Model
k20
Engine Size
350
I know the windshield is all good because I took the windshield out and then repaired all the rust that was hidden behind the rubber then I put all new rubber in their when I had the windshield put back in the cowl is all clean and the trucks been garaged since I repainted it I’m just chasing this leak
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,819
Reaction score
3,400
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
Water run inside the cowl area down the drains on both sides behind lower rear section of the fender.
 

Rusty Nail

Full Access Member
Joined
Jan 29, 2015
Posts
10,041
Reaction score
10,134
Location
the other side of the internet
First Name
Rusty
Truck Year
1977
Truck Model
C20
Engine Size
350sbc
But that correct answer has already been given to you once.

One guy found water leaking through the parking brake bolt holes...the trailer park dude...

There is a TON of good info in this bookmarked thread.

https://www.gmsquarebody.com/threads/water-on-floor.15825/

Buy ya a book, send you to school, **** I can't make ya click the links!

:poop:

At least you showed up to class and I guess that's somethin.

xc_hide_links_from_guests_guests_error_hide_media
 
Last edited:

Latest posts

Forum statistics

Threads
44,167
Posts
950,720
Members
36,282
Latest member
Doug Hampton
Top