u-bolts
- Thread starter nomad1500
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
MarineOne
Full Access Member
- Joined
- Jan 12, 2023
- Posts
- 440
- Reaction score
- 454
- Location
- Western New York
- First Name
- David
- Truck Year
- 1986
- Truck Model
- K25
- Engine Size
- 454
Diameter or length ?
PrairieDrifter
Full Access Member
- Joined
- Dec 28, 2014
- Posts
- 3,853
- Reaction score
- 5,646
- Location
- North Dakota
- First Name
- Mason
- Truck Year
- 84,79,77,76,70,48
- Truck Model
- Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
- Engine Size
- 350, 350, 350, 350, 350, 350
Should be 5/8 thread, i think 10-12 inches long and the axle tube should be 3 inch. The front has one longer u bolt though for one of the passenger side closest to the pumpkin.
Last edited:
nvrenuf
Full Access Member
- Joined
- Jul 30, 2010
- Posts
- 1,957
- Reaction score
- 2,460
- Location
- Mobile, Al.
- First Name
- John
- Truck Year
- 1991
- Truck Model
- K5
- Engine Size
- 454
The ubolt by the pumpkin is both longer and has a larger diameter than the other 3.
Also stock vs lift springs will affect the required length.
Also stock vs lift springs will affect the required length.
Dano500
Full Access Member
- Joined
- Jul 4, 2023
- Posts
- 292
- Reaction score
- 450
- Location
- Houston, TX
- First Name
- Dan
- Truck Year
- 1984
- Truck Model
- K20
- Engine Size
- 5.7
The one on the passenger side next to dif is definitely thicker diameter and I measured the width at 3.5, but just with tape measure. 9.5" for legs.
