Th350 MPG question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,247
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
I just learned last week or so that there was two versions of this trans. A lock up model and non lockup. I did some looking and found out that I don't have the lock up model in my truck but I should. Which explains the plug that has always hung beside the trans , not plugged in. Truck runs fine and dives perfect. But this got me to thinking, what do y'all think my mpg increase would be if I had the lock up version in my truck?

My truck is a stick 350/th350/205 . It's on 33" mud tires and has 3.08 gears. I get about 10mpg if I don't drive aggressive and can approach 12 if I baby the thing. It will get around 8mpg towing my 16ft dovetail car hauler trailer with my tractor, a few implements and an ATV....or basically about a 5000 pound load.

Just wondering. Not like I'm going to swap a perfectly working trans out but if it fails and I go to put another in I will probably look for a lock up to go back.
 

Green79Scottsdale

Full Access Member
Joined
Aug 8, 2010
Posts
2,834
Reaction score
7,487
Location
G.R. - MI
First Name
Bob
Truck Year
1979
Truck Model
K20
Engine Size
400
IMO... maybe 1 more mpg. Lockup doesn't lower your rpm down by a significant enough amount to make a big difference.
 
Last edited:

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,451
Reaction score
3,819
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
I would agree. It might make bigger difference strictly highway mileage. Assuming you have enough rear gear ratio, a 4L60 would be a nice upgrade. But only if/when your current trans dies.
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,266
Reaction score
2,210
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
With 3.08 gears and 33" tires you might not see much improvement with a lock-up 350. You are already running a really low cruise RPM, which probably puts the engine out of its optimal torque curve.

Bruce
 

shiftpro

Full Access Member
Joined
Aug 31, 2012
Posts
4,855
Reaction score
6,092
Location
BC Canada
First Name
shiftpro
Truck Year
73-87
Truck Model
1500, 2500, 3500
Engine Size
350, 383, 454, 496!
When the convertor is locked, you save creating extra heat and wear and tear. Not a big deal in a T350. Much more important in a 700.
 

shiftpro

Full Access Member
Joined
Aug 31, 2012
Posts
4,855
Reaction score
6,092
Location
BC Canada
First Name
shiftpro
Truck Year
73-87
Truck Model
1500, 2500, 3500
Engine Size
350, 383, 454, 496!
Your 308 gears are already to high anyway, a locking convertor will make things worse. You would get better mpg with 31" tires.
 

Rusty Nail

Full Access Member
Joined
Jan 29, 2015
Posts
10,041
Reaction score
10,134
Location
the other side of the internet
First Name
Rusty
Truck Year
1977
Truck Model
C20
Engine Size
350sbc
do y'all think my mpg increase would be if I had the lock up version in my truck?

No, I dont think that.
I believe locking and unlocking with 308s will cause exponentially more harm than good.
aint broke dont fix it?
:shrug:

I think I would be happy as a pig in **** if that combo got 10mpg for me out of that truck.
 
Last edited:

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,247
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
With 3.08 gears and 33" tires you might not see much improvement with a lock-up 350. You are already running a really low cruise RPM, which probably puts the engine out of its optimal torque curve.

Bruce
I seem to have plenty of torque while cruising down the highway. Now pulling a trailer and have to accelerate of course it drops to second.
 

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,247
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
No, I dont think that.
I believe locking and unlocking with 308s will cause exponentially more harm than good.
aint broke dont fix it?
:shrug:

I think I would be happy as a pig in **** if that combo got 10mpg for me out of that truck.
Well I get 10mpg just driving conservative. Like I said pulling a 16ft 5000pound trailer gets me around 8. Since my speedometer adapter broke the odometer doesn't work anymore. Well it does but it's about 30% low right now.

This is a lighter trailer than I will have sometimes. I will have another implement on sometimes like the disk harrow up front and tractor behind it with the bush hog. But it doesn't make any difference gets basically the same MPG.

You must be registered for see images attach
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,445
Reaction score
28,348
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
With 3.08 gears and 33" tires you might not see much improvement with a lock-up 350. You are already running a really low cruise RPM, which probably puts the engine out of its optimal torque curve.

Bruce

I agree with this 100%

Well I get 10mpg just driving conservative. Like I said pulling a 16ft 5000pound trailer gets me around 8. Since my speedometer adapter broke the odometer doesn't work anymore. Well it does but it's about 30% low right now.

This is a lighter trailer than I will have sometimes. I will have another implement on sometimes like the disk harrow up front and tractor behind it with the bush hog. But it doesn't make any difference gets basically the same MPG.

You must be registered for see images attach

Wow, I'm surprised that squats so much with a relatively light load. Or is it just the angle of the picture?
 

Camar068

Supporting Member
Supporting Member
Joined
Feb 5, 2014
Posts
4,293
Reaction score
3,339
Location
Kentucky
First Name
David
Truck Year
1986
Truck Model
K10/LM7 5.3/4L60e/np208/3.73/32"
Engine Size
10 yrs Air Force
I got 8mpg with a wore out 350/rebuilt 700r4/31" tires/3.08 gears. I'd be proud if I got 10 outta mine with a TH350.
 

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,247
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
I agree with this 100%



Wow, I'm surprised that squats so much with a relatively light load. Or is it just the angle of the picture?
I think some is the springs are tired?

The ATV in the bed is about 500 pounds. The tractor weighs about 2000 pounds with a 500 pound bush hog . The whole tractor is basically over or infront of the front axle of the trailer.

That trailer I guess is what 1500ish pounds. The tongue weight empty on that trailer is probably 200-250 pounds empty.
 

Frankenchevy

Proverbs 16:18
Joined
Jan 3, 2018
Posts
6,084
Reaction score
7,759
Location
USA
First Name
Jeremy
Truck Year
Square
Truck Model
CUCV
Engine Size
Small
I could be wrong because every setup is different. My flatbed and dump trailers have the axles offset slightly to the rear. I like just a slight bias of weight forward of the axles. Your tractor looks a bit far forward.

Back to the topic...with a lighter duty trans, I wouldn’t want lock up with the tall gear combo you have. It would probably go in and out of lockup constantly and heat it up. Unless you live somewhere flat and the th350c has the D without lockup position like some OD transmissions.

edit: accidentally typed that the tractor looked a bit far back when I meant forward.
 
Last edited:

Latest posts

Forum statistics

Threads
44,168
Posts
950,769
Members
36,283
Latest member
Cantrell299
Top