Steering Column Bearings - HELP

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

jka251

Junior Member
Joined
Feb 16, 2018
Posts
7
Reaction score
5
Location
Alabama
First Name
Keith
Truck Year
1984
Truck Model
K20
Engine Size
350
I just bought my 84 K20. The steering column was loose and it was the common 4 bolts needing to be tightened and loc-tite applied. I did that but in the process the inner and out steering wheel bearings came out. One of them was damaged. I am in the process of trying to put them back in but it's been a pain. The bearings are in pieces and the balls are only held in by grease. I've left the wiring on the column attached and have the steering sector where the turn signal switch and ignition tumbler are attached to the wiring as well. All of this is hanging loosely. I'm having a hard time putting the bearings back in and getting them to stay in place so I can put the pivot pins and everything else back together. Does anyone have a good method or re-assembly of these? Also, is there some type of aftermarket one piece bearing that I could use in place or cross reference a one piece bearing? These are extremely aggravating. Any help is appreciated.
 

77c102door

Full Access Member
Joined
Mar 11, 2015
Posts
113
Reaction score
14
Location
Newark
First Name
Harjeet
Truck Year
1977
Truck Model
c10
Engine Size
350
What I ended up doing is buying a column rebuild kit which had new bearings and then bought bearing and race installer. Worked like a charm
 

Charlie

Mopar by Birth. Chevy by Choice.
Joined
Aug 2, 2017
Posts
1,837
Reaction score
912
Location
Euless, Texas
First Name
Don
Truck Year
1974
Truck Model
Cheyenne 10 LWB
Engine Size
350/TH350/AC/4 BBL Quadrajet
:welcome:
 

MrMarty51

Full Access Member
Joined
Oct 25, 2012
Posts
7,794
Reaction score
10,022
Location
Eastern Montana
First Name
Martin
Truck Year
1978
Truck Model
K20
Engine Size
400
Yeah, welcome to the GMSB forum 251.
 

74 Shortbed

Full Access Member
Joined
Aug 12, 2013
Posts
6,306
Reaction score
1,413
Location
*
First Name
*
Truck Year
*
Truck Model
*
Engine Size
*
Welcome to the site.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Welcome to GMSB.

I'm almost certain the only way to get those bearings is to buy the column rebuild kit.
 

jka251

Junior Member
Joined
Feb 16, 2018
Posts
7
Reaction score
5
Location
Alabama
First Name
Keith
Truck Year
1984
Truck Model
K20
Engine Size
350
Thanks for the help and the welcome. I did end up buying a rebuild kit. The new bearings were still a pain to install but I did a little polishing on them and got them in. Appreciate it guys.
 

cmoore

Junior Member
Joined
Nov 2, 2018
Posts
16
Reaction score
0
Location
Florida
First Name
Chad
Truck Year
1991
Truck Model
V3500
Engine Size
350
Where did you purchase the rebuild kit from?
 

Big Chip

Full Access Member
Joined
Oct 19, 2017
Posts
4,656
Reaction score
6,734
Location
Michigan
First Name
Kevin
Truck Year
1979
Truck Model
C35
Engine Size
454
Well the way he’s trying, you’d think he has the Arc of the Covenant
Maybe so and it just so happens that's what I'm looking for. On the plus side, you have accomplished your goal! Congratulations!
 

Honky Kong jr

Super Sarcastic Man
Joined
Jun 14, 2016
Posts
14,968
Reaction score
9,828
Location
Denver,PA
First Name
J-me
Truck Year
87
Truck Model
V10
Engine Size
Lil BB 407
Maybe so and it just so happens that's what I'm looking for. On the plus side, you have accomplished your goal! Congratulations!
Sweeeeeeet!!!!!!
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,445
Reaction score
28,347
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
At least it was an actual post this time. But now I'm curious where the kit was bought too.

Lol, and what he wants to sell.
 

Latest posts

Forum statistics

Threads
44,166
Posts
950,714
Members
36,280
Latest member
rodfarm
Top