Spindles

[Tank6x2]

Anybody used western chassis or street edge drop spindles?? Thoughts on them over the glorified cost of bell tech, or is bell tech what I know / used before - the way to go?

 

[Tank6x2]

Since nobody new/ replied, manufacturer’s wholesaler says street edge is made in the facility just a different stamp mark.

 

[bucket]

I had never even heard of Street Edge, but I also haven't spent much time around lowered trucks in recent years.

 

[Tank6x2]

I had never even heard of Street Edge, but I also haven't spent much time around lowered trucks in recent years.

Neither had I, but for 110$USd difference in price I’ll be a Guinea pig

 

[Sepulvd]

I was about to order CPP drop spindles. But might look at street edge now

 

[Bennyt]

Street Edge, Bell Tech, Western Chassis/ POL are all the old design which is fine for 15-17" wheels and stock brakes. If you plan on doing any brake upgrades or big wheels, spend a hundred or so more and buy CPP Modular or if really going big, CPP X10 or Wilwood. The CPP's also suck the wheel into a drum offset which helps with scrub radius, fitment, etc.

 

[Tank6x2]

Street Edge, Bell Tech, Western Chassis/ POL are all the old design which is fine for 15-17" wheels and stock brakes. If you plan on doing any brake upgrades or big wheels, spend a hundred or so more and buy CPP Modular or if really going big, CPP X10 or Wilwood. The CPP's also suck the wheel into a drum offset which helps with scrub radius, fitment, etc.

Going on a c30 stock brakes and 20” DSW Delrays