ok, now THAT was scary!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mikeoverland

Full Access Member
Joined
Oct 24, 2021
Posts
142
Reaction score
253
Location
san antonio tx
First Name
michael
Truck Year
1981
Truck Model
C10
Engine Size
250/I6
I decided to take the basket case over to a buddy's house to show him what i've accomplished and to see if what I've done will convince him to get his 76 Heavy Half (454/th400) back on the road. Well since i had the truck out i finally decided to see if the truck would behave it's self on the highway and to see if the truck could go faster than 45. I took that little I6 in second (and a foot on the floor) onto I10. I hit 55 in 3rd and that truck shook rattled rolled and was probably the scariest ride i've ever been on. I had it figured that the truck would either blow up or put me into a retaining wall. I lived and i do know that the truck can now roll on the interstate and that ti will do at least 55......... it's the small victories that i live for.
 

mxer147

83 K20, 350 vortec, 465, 208, 14/10, 4.10, 33s
Joined
Feb 8, 2023
Posts
607
Reaction score
2,191
Location
Colorado
First Name
Jack
Truck Year
1983
Truck Model
k20
Engine Size
350
I’m thinking my highway experience will be similar with my 83 K20, I’m really not too eager for the white knuckle ride. Thinking I’ll try it early Saturday morning when traffic very light.
 

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,534
Reaction score
4,583
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Talking about death wobble?? I've had that several times over the years in different rigs.
 

Craig Nedrow

NADAR UNDER THE RADAR
Supporting Member
Joined
Sep 1, 2018
Posts
1,036
Reaction score
2,184
Location
Washington State
First Name
Craig
Truck Year
1973 (have two), 1985
Truck Model
K10, K20, C20
Engine Size
350, 454, 6.2 Detroit
Sounds like my K10 farm truck wood hauler. Probably front tie rod...maybe more
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,970
Reaction score
12,222
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Highly unlikely it was DW in a C10.

Another reason I “love” this 86 and didn’t cringe forking over a few more Benjis than I’d hoped.
During the test drive, flat peddled that mfer on the on-ramp, on old Azz tires that definitely didn’t have enough air in them for hi speed maneuvers. And I let out just below the stopper peg on the 85mph speedo (which by my calculations and the 4000rpms on the tach was an easy 90+ mph) and the scariest part of it was the gas gauge was planted on E and it wasn’t my truck and I still didn’t know if the tank selector worked!
 

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,250
Reaction score
17,177
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
A friend had a 58 F250 4x4. Cool truck. Had a 428 in it, and the truck would develop death wobble at 80. My friend figured out if he gassed it and yanked the steering wheel it would stop. I rode in it a few times when that happened and I tell you it was scary. But, it smoothed out, so there's that.

It looked like this truck, except it had chrome bumpers to match chrome grille and had wider wheels and tires on it.

You must be registered for see images attach
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,970
Reaction score
12,222
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Highly unlikely it was DW in a C10.

Another reason I “love” this 86 and didn’t cringe forking over a few more Benjis than I’d hoped.
During the test drive, flat peddled that mfer on the on-ramp, on old Azz tires that definitely didn’t have enough air in them for hi speed maneuvers. And I let out just below the stopper peg on the 85mph speedo (which by my calculations and the 4000rpms on the tach was an easy 90+ mph) and the scariest part of it was the gas gauge was planted on E and it wasn’t my truck and I still didn’t know if the tank selector worked!
Appreciate the responses although it wasn’t that exciting. That was my point. She drove straight and smooth.
 

CheemsK1500

Full Access Member
Joined
Jun 3, 2022
Posts
831
Reaction score
1,471
Location
Texas
First Name
Paul
Truck Year
1984
Truck Model
K1500
Engine Size
305
I bought a '84 K1500 a while back that sat for several years, I finally got it to start and run, and drove down an empty road. The rotten brake line on one of the front wheels ended up rupturing, luckily I wasn't far from home and not moving very fast. I now carefully examine rubber brake lines on any used vehicle. No death wobble so far, it's driven pretty smooth by solid axle 4x4 standards.
 

Latest posts

Forum statistics

Threads
44,166
Posts
950,714
Members
36,280
Latest member
rodfarm
Top