Lowering shocks

[Erick50]

I got a mcgaughys lowering kit but they didn’t come with shocks and now I’m stuck and don’t know what to get for my truck


Sent from my iPhone using Tapatalk

 

[78shortandwide]

What kit did you get I have a -2 in the front and -4 in the rear I got mine with shocks

 

[78shortandwide]

http://mcgaughys.com/products/economy-kit-33149

Here is the link to my kit you have to buy the shocks separately

 

[MikeB]

Or you could check out Belltech.

https://www.belltech.com/products/b...belltech-nitro-drop-2-front-lowered-8005.html

https://www.belltech.com/products/b.../belltech-nitro-drop-2-rear-lowered-8505.html

 

[bluex]

Just run stock shocks with that 2/4 drop. I like kyb gr2s they ride good an wont break the bank. 344068 front an 344072 rear.

 

[Erick50]

What kit did you get I have a -2 in the front and -4 in the rear I got mine with shocks

I got the 4.5in drop in the front and the 6in drop in the back


Sent from my iPhone using Tapatalk

 

[bluex]

I got the 4.5in drop in the front and the 6in drop in the back


Sent from my iPhone using Tapatalk

You can still use the shocks I posted then, just use a shock extender bracket on the rear as well.

 

[Scott91370]

Is it 4.5" spring drop or mix of spring and spindle?

I did 4.5" with a 2" spring and 2.5" spindle and used KYB shocks of stock length. I bought the front shock extenders but with them installed the shocks were too short (and these were supposed to be factory length).
I have a set of front shock extenders if you're looking at buying a set. I bolted them on and took them off about 15 minutes later - never even moved the truck with them installed.
These are what I bought: https://www.speedwaymotors.com/West...lsFei3eA2fn6Yv9y6ANhXYWSeI7l_PaQaAqBhEALw_wcB