Lots of items, big and small

[bucket]

10 spline SM465 tranny, shifter was cut and needs welded back together. $100

Bellhousing for mechanical clutch, includes ball stud and fork. $50

SM 465 to np205 figure 8 adapter. $60

10 spline coupler sleeve, little wear, but not bad. $40

350 Shortblock. 4 bolt main, 1 piece rear main seal, factory windage tray, has provisions for factory style roller cam. Has high miles but ran great with good oil pressure and no noises. I personally drove the donor vehicle. EXCELLENT foundation for a performance build. $250 firm

Warn 8274 winch, complete but don't know if it needs solenoids or something. $300 SOLD

'75-'76 Chevy truck grill, nice shape overall, needs painted. $40 SOLD

Old winch mount/ brush guard, made by Warn. Originally for '78-'95 GM vans, but it's been modified for use on '73-'80 GM trucks too. Needs minor work. $100

NIB Erson cam, mid-upper RPM range, little lopey (have spec sheet). $40

'73-'80 Aftermarket fenders, pretty good shape, includes inner fenderwells. $70 each

Factory roll bar from '75 Blazer, includes trim bezels for carpet. $75

'73-'80 stone guards for in front of rear wheels, stainless, dealer installed item. $20 SOLD

'73-'87/'91 Stainless vent visors for front doors, dealer installed item. $20 SOLD

OBO on all of it except motor, obviously some of it should be local pickup. I can get pics of any of it.

 

[crazy4offroad]

Is the winch mount/brush guard a bumper as well? I'd like to see pics, if it is.

 

[bucket]

No, it bolts onto the stock bumper using the stock bolt holes, so it does at least tie into the frame.

 

[crazy4offroad]

I still might be interested in it. It would cost me $40 round trip to get to Athens, so shipping it might be a better alternative if you're down for it.

 

[bucket]

It's way to heavy (and large) to try messing with shipping. Meeting part way could be an option though. Or even delivery. I'll be heading down to Charlotte soon to bring back a VW Beetle.

Here's some pics I took a while back. The hitch has been added and the center mounts have been added so it bolts to the truck. You can drill 4 holes in the bumper and use the outer mounts also.

You must be registered for see images attach

You must be registered for see images attach

 

[bucket]

C'mon fellas, I need to clear some room! I need it gone, make an offer if my price is too high

 

[Wrecker]

Can you post a pic of the 8274? When you say it might need solenoids, do you mean it isn't working or is it unknown? Also, does it have the remote?

 

[bucket]

Can you post a pic of the 8274? When you say it might need solenoids, do you mean it isn't working or is it unknown? Also, does it have the remote?

It's unknown, I have the remote for it too. It's all there, but the cable is kinda ratty. I'll get a pic.

 

[xicor37]

What is the best deal you can give me on the grill shipped to Louisville area, 40014?

~Tyler

 

[bucket]

What is the best deal you can give me on the grill shipped to Louisville area, 40014?

~Tyler

I'll get a pic and figure shipping tomorrow (sun)

 

[bucket]

Oh, I see you have a '77. the '75-'76 grille may not fit without using the correct hood latch. I know it won't fit my '77, but it has the optional inside hood release that uses a different latch and release handle.

 

[RetroC10Sport]

Don't know why it wouldn't fit. I put a 1973 grille in my 1977 with no mods to the hood release.

The '73 grille also fit my 1978 with an inside release.

 

[bucket]

What is the best deal you can give me on the grill shipped to Louisville area, 40014?

~Tyler

How about $50 shipped?

You must be registered for see images attach

 

[xicor37]

Deal! Email me at xicor37@gmail dot com for payment info. I can do PayPal or snail mail or whatever you want.

~Tyler

 

[bucket]

Deal! Email me at xicor37@gmail dot com for payment info. I can do PayPal or snail mail or whatever you want.

~Tyler

I sent you a PM, my email is a little screwy sometimes.