Holley carbs

[Mad gimp]

Might be a long shot but does anybody here happen to have a parts diagram for a holley 4777-3 carb? I have one on the shelf that im gonna rebuild to put on the wifes hotrod so i dont have to take "her 750" off "my dually". I need a diagram because im not sure if the rear metering block is the right one for that carb. It kinda looks like somebody has swapped some parts around on this carb. Any help would be appreciated!

 

[Honky Kong jr]

Might be a long shot but does anybody here happen to have a parts diagram for a holley 4777-3 carb? I have one on the shelf that im gonna rebuild to put on the wifes hotrod so i dont have to take "her 750" off "my dually". I need a diagram because im not sure if the rear metering block is the right one for that carb. It kinda looks like somebody has swapped some parts around on this carb. Any help would be appreciated!

When you get a rebuild kit it comes with a blow up of the carb.

 

[Mad gimp]

When you get a rebuild kit it comes with a blow up of the carb.

The kits i buy dont have that. I only the kits from Quick Fuel. To me their parts are better than even holley parts.

 

[Honky Kong jr]

The kits i buy dont have that. I only the kits from Quick Fuel. To me their parts are better than even holley parts.

So get a Holley kit pull out the paperwork and sell the rest on CL or go to a book store and get a Holley book

 

[bucket]

I've got some diagrams, I'll give them a look-see shortly.

 

[bucket]

I only have a general 4150/4160 diagram.

You must be registered for see images attach

 

[Honky Kong jr]

I have a Holley bible, but it’s in the garage and I’m inside. Lol

 

[Mad gimp]

So get a Holley kit pull out the paperwork and sell the rest on CL or go to a book store and get a Holley book

Good idea i recon! I only asked this question on here with the thought that somebody on here might just happen to have the diagram out of a kit they've bought. They could just scan it and post it. That would save me a 20 mile round trip to go get a kit that i wont use. Then have to deal with a bunch of illiterate people that craiglists adds seem to draw

 

[bucket]

Good idea i recon! I only asked this question on here with the thought that somebody on here might just happen to have the diagram out of a kit they've bought. They could just scan it and post it. That would save me a 20 mile round trip to go get a kit that i wont use. Then have to deal with a bunch of illiterate people that craiglists adds seem to draw

You could sell the kit here, where the people tend to be smarter.

HK, shh.

 

[Honky Kong jr]

You could sell the kit here, where the people tend to be smarter.

HK, shh.

Bwahahahahahaha some.

 

[Mad gimp]

You could sell the kit here, where the people tend to be smarter.

HK, shh.

now thats a thought

 

[Mad gimp]

I only have a general 4150/4160 diagram.

You must be registered for see images attach

yeah thats the same one i have. but it shows nothing about a 4777 but thank you anyways

 

[Mad gimp]

the main thing i need to know is if the secondary metering block is the correct one for this carb so i know which gasket to use. there was no gasket in it to go by. i looked on holley's website and all there part number lookup says is NA for secondary metering block.

 

[Honky Kong jr]

the main thing i need to know is if the secondary metering block is the correct one for this carb so i know which gasket to use. there was no gasket in it to go by. i looked on holley's website and all there part number lookup says is NA for secondary metering block.

Throw up a pic of your carb.

 

[Mad gimp]

Throw up a pic of your carb.

ill do that in the A.M. too cold to go out to the garage in my sleepin clothes lol