header and exhaust kit?

[xicor37]

I need to put a new exhaust on my truck. Does anyone know if anyone sells a complete kit from headers to tailpipe? I'd like a dual exhaust setup that exits out the rear. I'm trying to find a decent pre bent kit so I can do it myself and not have to take it to a shop.

I wouldn't mind buying the headers and exhaust separate. But I don't know if the flanges will meet up.

Also recommendations for good headers/exhaust.

350, 4x4, mt, short bed, '77

Thanks,
~Tyler

 

[davbell22602]

If you buy headers for 350 4x4 manual transmission then it should fit just fine. Do you have brand name in mind for the exhaust headers?

 

[bucket]

Six years ago I bought a Hooker dual exhaust kit and Hedman headers. I found out when I opened everything up that the Hooker kit was designed to bolt directly to the Hooker headers that are available, no modding. I ended up just adapting the exhaust to the headers.

But like I said, that was 6 years ago and I'm not sure if the Hooker exhaust is still available.

Also, the pipes exit in the stock location, behind the rear tires. All of the kits are like this. If you want rear exits, you will have to make that part yourself... it looks like it would be easy to do.

 

[davbell22602]

Six years ago I bought a Hooker dual exhaust kit and Hedman headers. I found out when I opened everything up that the Hooker kit was designed to bolt directly to the Hooker headers that are available, no modding. I ended up just adapting the exhaust to the headers.

But like I said, that was 6 years ago and I'm not sure if the Hooker exhaust is still available.

Also, the pipes exit in the stock location, behind the rear tires. All of the kits are like this. If you want rear exits, you will have to make that part yourself... it looks like it would be easy to do.

Jegs and Summit sells hooker stuff.

 

[bucket]

Jegs and Summit sells hooker stuff.

Yeah, I know. But at one point in time, the exhaust kit for our trucks had been discontinued, then production started up again. When I bought mine, the kit wasn't even listed in the catalog. I had the salesman in the Jeg's store find it for me and order it.

 

[davbell22602]

Yeah, I know. But at one point in time, the exhaust kit for our trucks had been discontinued, then production started up again. When I bought mine, the kit wasn't even listed in the catalog. I had the salesman in the Jeg's store find it for me and order it.

Here's what comes up under jegs.

http://www.jegs.com/webapp/wcs/stor...=0&N=1531908+4294916253&catalogId=10002&Nty=0

 

[bucket]

Here's what comes up under jegs.

http://www.jegs.com/webapp/wcs/stor...=0&N=1531908+4294916253&catalogId=10002&Nty=0

Well there you go. Looks like #16526 is what I bought, looks like it's went up about 40 bucks too.

 

[davbell22602]

Well there you go. Looks like #16526 is what I bought, looks like it's went up about 40 bucks too.

Thats just exhaust pipe right?

 

[xicor37]

I don't particularly care what brand they are. I just want everything to clear and it all to fit right and bolt up. I guess I'll just call jegs or summit and tell them what I want.

~Tyler

 

[bucket]

As far as I know, the Hooker kit is the only one that's designed to bolt up to a specific set of headers.