Extra parts clean out

[CSFJ]

Time to find new homes for some of the parts that have accumulated in the last couple of years.

First up,

Matched set of axles from a 1987 v20. 119,*** miles, 3.73 gearing
Corp 10 bolt front, 8 lug pattern, Warn premium lockouts, open diff.
14 bolt semi-float rear, 8 lug pattern, open diff.
$250 each, or $400 for the set

NP208 transfercase, 119,*** miles, shifted good, no odd noises. Was attached to a 700r4
Includes shifter.
$75

Both drive shafts, from 350/700r4/np208 application,
$20 each

Dana44 front axle. Older model with external bolts on front hubs, flat top knuckles, 8 lug pattern. 4.10 gearset.
$250

Dana70 HD. 4.10 gear. 1 drum siezed
$100

Prices are negotiable, the more you buy the more negotiable they are. Have some other stuff too, but these are what's most in my way, and at the front of my mind right now. I'd rather sell off here than deal with Craigslist, so you guys get first shot. At some point in the near future, I'll have a set of 8 foot Texas box sides from an eighties vintage dual tank truck.

 

[Honky Kong jr]

Time to find new homes for some of the parts that have accumulated in the last couple of years.

First up,

Matched set of axles from a 1987 v20. 119,*** miles, 3.73 gearing
Corp 10 bolt front, 8 lug pattern, Warn premium lockouts, open diff.
14 bolt semi-float rear, 8 lug pattern, open diff.
$250 each, or $400 for the set

NP208 transfercase, 119,*** miles, shifted good, no odd noises. Was attached to a 700r4
Includes shifter.
$75

Both drive shafts, from 350/700r4/np208 application,
$20 each

Dana44 front axle. Older model with external bolts on front hubs, flat top knuckles, 8 lug pattern. 4.10 gearset.
$250

Dana70 HD. 4.10 gear. 1 drum siezed
$100

Prices are negotiable, the more you buy the more negotiable they are. Have some other stuff too, but these are what's most in my way, and at the front of my mind right now. I'd rather sell off here than deal with Craigslist, so you guys get first shot. At some point in the near future, I'll have a set of 8 foot Texas box sides from an eighties vintage dual tank truck.

You deliver? Flat tops would be nice...

 

[CSFJ]

lol.



no.

But, I think I found another set of D44 8 lug hubs, spindles and flat top knuckles under a bench in the barn. Were originally for the next upgrade on my jeep when I had it. I need to drag them out and find out exactly whats there. Wipe the crap off them and post them for sale too.

 

[Adamds86]

Where u located? I'm in the finger lakes (central New York)

Sent from my Pixel using Tapatalk

 

[CSFJ]

Where u located? I'm in the finger lakes (central New York)

Sent from my Pixel using Tapatalk

About 10 miles east of Flint, Michigan.

 

[Adamds86]

About 10 miles east of Flint, Michigan.

Damn...that's like a 6 hr drive for me lol

Sent from my Pixel using Tapatalk

 

[CSFJ]

Lol, that's closer than I figured it would be.

 

[Wes]

How feasible would it be to ship the driveshafts? 32703 is my Zip (Florida).

 

[CSFJ]

How feasible would it be to ship the driveshafts? 32703 is my Zip (Florida).

Not sure. The front would be fairly easy, I would think. The rear, not so sure. Unless ups has changed their oversize rules, I'm thinking it would be longer than their chain they use to gauge the size of the packaging. I'll have to get some measurements, and check tomorrow.

 

[CSFJ]

Just checked ups, and usps. Guessing the weights somewhere between 20-30 lbs, and the size of the tubes needed to ship them, you'd be in the $80 ballpark on just shipping.

 

[nukeme70]

Greetings - I'd like to jump in line for the front driveshaft. Shipping would be to 77845.

Thanks,
Scott.

 

[CSFJ]

I'll try to find a source after work for shipping tubes.

 

[ajd89]

About 10 miles east of Flint, Michigan.

Cool glad to see another michagander on here im an hour north east of flint!

 

[CSFJ]

Greetings - I'd like to jump in line for the front driveshaft. Shipping would be to 77845.

Thanks,
Scott.

you'd be looking at about $50 dollars shipping on top of the original price.

 

[CSFJ]

after looking up the shipping costs, I don't think it's realistic to ship the drive shafts. Especially the rear one. If you guys need dimensions or pics of what to look for locally, I can get those, but I gotta believe you can find these closer to home.