Drop Shackles hitting bed
- Thread starter MelbGMC
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Joined
- Aug 3, 2010
- Posts
- 30,445
- Reaction score
- 28,347
- Location
- Usually not in Ohio
- First Name
- Andy
- Truck Year
- '77, '78, '79, '84, '88
- Truck Model
- K5 thru K30
- Engine Size
- 350-454
Looks like you'll either have to shave the wood in that area, or move the springs to the next hole in the shackles and trim the shackles. That 1" difference will raise the truck about half an inch.
Finkaire
Finkaire
- Joined
- Dec 28, 2021
- Posts
- 454
- Reaction score
- 746
- Location
- California
- First Name
- Loren
- Truck Year
- 1984
- Truck Model
- Silverado c10
- Engine Size
- 305
Considering 1” to 2” drop shackles for the rear. I’ve got a 1/2 ton Stepside with heavy duty springs. Any problems to be aware of?
Scott91370
Full Access Member
- Joined
- Apr 2, 2018
- Posts
- 997
- Reaction score
- 1,019
- Location
- Burleson, Tx
- First Name
- Scott
- Truck Year
- 1985
- Truck Model
- Sierra1500
- Engine Size
- 350
If you use 2" you will run into the same problem as the original poster did. Either going with 1" might help or you will need to notch the rail under the bed.
Radiohead
That guy on the Columbia
- Joined
- Mar 17, 2022
- Posts
- 2,486
- Reaction score
- 8,110
- Location
- Low Earth Orbit where it's safer
- First Name
- Eric
- Truck Year
- MCMLXXIX
- Truck Model
- C-20 Silverado Camper Special
- Engine Size
- 454 crazy cubes, or 7.4 luscious litres
Why did those shackles look like thick plumbers tape?
Similar threads
