Door Panels
- Thread starter Bow_Tie
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Craig 85
Full Access Member
- Joined
- Jan 25, 2017
- Posts
- 3,917
- Reaction score
- 4,116
- Location
- Nashville, TN
- First Name
- Craig
- Truck Year
- 1985
- Truck Model
- K30 SRW
- Engine Size
- 454/TH-400/NP205
I put 81-87 door panels on my '79. You will have to change the door handles and arm rests. The door sweep might be different, too.
You must be registered for see images attach
Corvette Ed
Full Access Member
- Joined
- Nov 29, 2020
- Posts
- 3,861
- Reaction score
- 14,647
- Location
- East Tennessee
- First Name
- Eli
- Truck Year
- 79
- Truck Model
- C10
- Engine Size
- 250
Looks good.
Raider L
Full Access Member
- Joined
- Sep 1, 2020
- Posts
- 1,892
- Reaction score
- 1,001
- Location
- Shreveport, LA
- First Name
- William
- Truck Year
- 1974
- Truck Model
- C10
- Engine Size
- 355
@Bow_Tie,
I noticed something when I had to replace my window regulator Drivers side, here recently and that was the regulator pin, the thing you put your window crank on, is longer in some years trucks. The regulator I got from a wrecking yard was off a '77 Surburban. Unless you get the correct window regulator for the year panel you are replacing, the pin will be either to long or to short. The pin from the Surburban was a little to long, but okay so long as it was smooth operating that's all I cared about.
I wanted to get a '73 window regulator recently, because it was $19.00 with some guy on Ebay, passenger side, and the seller said his book said the '73 regulator would not work in a '74. I knew the panel was just like the panel in my '74 but there must have been some kind of difference where it wouldn't work. So I bought a regulator for a '74-'76 C10 from some car parts site for $39.00. And when I got it the pin was the correct length for my door panel.
I noticed something when I had to replace my window regulator Drivers side, here recently and that was the regulator pin, the thing you put your window crank on, is longer in some years trucks. The regulator I got from a wrecking yard was off a '77 Surburban. Unless you get the correct window regulator for the year panel you are replacing, the pin will be either to long or to short. The pin from the Surburban was a little to long, but okay so long as it was smooth operating that's all I cared about.
I wanted to get a '73 window regulator recently, because it was $19.00 with some guy on Ebay, passenger side, and the seller said his book said the '73 regulator would not work in a '74. I knew the panel was just like the panel in my '74 but there must have been some kind of difference where it wouldn't work. So I bought a regulator for a '74-'76 C10 from some car parts site for $39.00. And when I got it the pin was the correct length for my door panel.
