Cracked 6" superlift front leafspring

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Booyakashaw

Junior Member
Joined
Mar 11, 2021
Posts
19
Reaction score
14
Location
Canada
First Name
Del
Truck Year
1981
Truck Model
K2500
Engine Size
350
Hey guys,

Suggestions on best or easiest way to go about fixing this cracked leaf?

I can find a replacement leafspring, but then j would need bushings etc. I think it is just the overload part of the spring?

View media item 9458View media item 9468
You must be registered for see images attach
 

Bennyt

Full Access Member
Joined
May 17, 2019
Posts
1,193
Reaction score
1,842
Location
Surprise
First Name
Ben
Truck Year
1977
Truck Model
C10
Engine Size
350
As stated, probably just the overload but I would disassemble and inspect the spring pack carefully for any other damage. I'd also add an ORD/ DIY4x 1" block to help spread the load across the spring pack and perch. It possibly would prevent the break that you experienced here.
 

hirschdalechevy

Full Access Member
Joined
Mar 8, 2011
Posts
726
Reaction score
517
Location
norcal
First Name
rich
Truck Year
1977
Truck Model
k-30
Engine Size
454
I have had that happen to me back in the past on one of my old square's. The pieces can work their way out over time and fall out going down the road. I would not mess around with that on the front.

Remove both front springs and go to a spring shop and have them add a new leaf with a re-arc, (they will be checked out then), or just order two new springs.
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,940
Reaction score
2,424
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
If you have the lift kit receipt or there are obvious brand markings, I would call Superlift and ask about warranty. Some companies offer a lift time warranty.

In any case, as stated stop driving that truck now! That spring is broken in half and WILL move around until it falls out. Once it falls out that entire side is going to be loose and will move around while driving.
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,439
Reaction score
5,572
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
I agree with everyone else... Stop driving it now. I'd call superlift and send them pics of it. Its likely that they will send you new springs as a crack like that shouldn't happen.
 

Booyakashaw

Junior Member
Joined
Mar 11, 2021
Posts
19
Reaction score
14
Location
Canada
First Name
Del
Truck Year
1981
Truck Model
K2500
Engine Size
350
If you have the lift kit receipt or there are obvious brand markings, I would call Superlift and ask about warranty. Some companies offer a lift time warranty.

In any case, as stated stop driving that truck now! That spring is broken in half and WILL move around until it falls out. Once it falls out that entire side is going to be loose and will move around while driving.

Thanks, I tried getting ahold of superlift but they haven't responded back. I purchased the truck after the lift was installed. They do offer lifetime warranty to original owner.
 

Booyakashaw

Junior Member
Joined
Mar 11, 2021
Posts
19
Reaction score
14
Location
Canada
First Name
Del
Truck Year
1981
Truck Model
K2500
Engine Size
350
I agree with everyone else... Stop driving it now. I'd call superlift and send them pics of it. Its likely that they will send you new springs as a crack like that shouldn't happen.

Thanks for the reply,
I tried contacting via Facebook as well as their customer service page.
 

Booyakashaw

Junior Member
Joined
Mar 11, 2021
Posts
19
Reaction score
14
Location
Canada
First Name
Del
Truck Year
1981
Truck Model
K2500
Engine Size
350
As stated, probably just the overload but I would disassemble and inspect the spring pack carefully for any other damage. I'd also add an ORD/ DIY4x 1" block to help spread the load across the spring pack and perch. It possibly would prevent the break that you experienced here.

Thanks for the reply,

What is a ORD / DIY 4x1" block?
 

Booyakashaw

Junior Member
Joined
Mar 11, 2021
Posts
19
Reaction score
14
Location
Canada
First Name
Del
Truck Year
1981
Truck Model
K2500
Engine Size
350
How would it be if I removed both of the overload leafs?
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,439
Reaction score
5,572
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
How would it be if I removed both of the overload leafs?

They aren't really "overload leafs" on the front spring pack. You can remove the leaf from each side, but it will sit much lower. You also shouldn't reuse U-bolts, so there's that as well if you decide to remove and reinstall with less springs.
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,101
Reaction score
3,119
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
Thanks for the reply,

What is a ORD / DIY 4x1" block?

It is a 1" spacer that is bolted into your spring pack. If you removed that bottom leaf your truck will sit lower, but it should ride slightly nicer. If you put this zero rate in there it will raise it 1" up. You also have the option to relocated the axle front or back.

You must be registered for see images attach
 

Latest posts

Forum statistics

Threads
44,076
Posts
948,917
Members
36,148
Latest member
yeti_87
Top