Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Looking for the brake pedal setup for power brakes for an 85 C10.
Are you doing a conversion or what? You want nothing but the pedal itself, or you need the hanger too?
Ive got a couple if squareroot dont have it.Converting from hydroboost to power brakes. Just need the arm, don't need the big bracket it bolts to.
Send me some pics. Could also use the booster push rod.
You must be registered for see images attach
You must be registered for see images attach
Are these from a C10? Where is the pivot mounted on the top picture, centered, to the rear of the shaft? I don't need the large bracket the pedal is mounted to. I want the push rod.
The bottom one pictured looks to be a hydroboost.
I'll PM you.
Came from 86/87 k10s. And good eye on the last one. Lol I didnt even notice that had to go back out and look again. Didnt think I had one of them.
This is what you wanted to see?
Got your pm.
You must be registered for see images attach
You must be registered for see images attach