Bed hardware

[slows]

I recently picked up most of the parts of a 6 foot bed off of a 1984 K10. No hardware was included and was looking around on the webs but can only find header panel to sides/floor bolts.
Anyone know where I can get the rest of the bolts I need (bedside to floor, wheel house etc..)??

 

[chengny]

I recently picked up most of the parts of a 6 foot bed off of a 1984 K10. No hardware was included and was looking around on the webs but can only find header panel to sides/floor bolts.
Anyone know where I can get the rest of the bolts I need (bedside to floor, wheel house etc..)??

You will probably be better off just using "off the shelf" fasteners. They will be cheaper and way easier to source. If you have trouble finding a particular piece, check with Fastenal - they have plenty of retail locations in PA. See the dwg/parts list below for the diameter, thread pitch and length of the bolts you need:

You must be registered for see images attach

Sorry about the wood floor - that's the only dwg I had.

 

[Charlie]

 

[slows]

chengny, thanks for the diagram, much appreciated. I assume the 5/16 bolts would be the same size for the fleetside beds so I will ,be visiting Fastenal soon!

 

[bucket]

They are just 5/16 bolts with free-spinning washers and pointed tips. Black oxide coating. A few locations do not have the washers, but that doesn't matter if you aren't doing a showroom resto.