Auxiliary trans

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1984dually

Full Access Member
Joined
Aug 31, 2013
Posts
247
Reaction score
57
Location
Malin OR
First Name
Danny
Truck Year
1984
Truck Model
C30
Engine Size
8.1L
recently swapped out a set of 3.73 gears to 4.56 in my 84 Dually. Nice for pulling but would like more gear for running around empty. Current trans is a 4L80e. Anybody ever add a auxiliary trans like a two speed brownie?
 

84 M1008

Full Access Member
Joined
May 11, 2018
Posts
363
Reaction score
197
Location
New York
First Name
Wayne
Truck Year
1984
Truck Model
M1008 K30
Engine Size
6.2 diesel
Put a Gear Vendors on it. I'm swapping out the 4.56 gears to 3.73 on my M1008 so I can run the 6.2 on the highway without having the engine fly up through the hood. You can split each gear with the Gear Vendors also depending on the load you are towing.
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,192
Reaction score
8,030
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
recently swapped out a set of 3.73 gears to 4.56 in my 84 Dually. Nice for pulling but would like more gear for running around empty. Current trans is a 4L80e. Anybody ever add a auxiliary trans like a two speed brownie?

I'm running a th400 with 4:56 gears. I just want an OD so I don't redline trying to do the speed limit. And then theres guys who have an OD and they want another! Lol
 

1984dually

Full Access Member
Joined
Aug 31, 2013
Posts
247
Reaction score
57
Location
Malin OR
First Name
Danny
Truck Year
1984
Truck Model
C30
Engine Size
8.1L
Gear venders out of my price range and they don't recommend towing in OD. On flat ground I did just fine with the 3.73 set up. Lots of hill pulling here and the reason for the 4.56. Rpm at 60 went from 1700 to around 2100.
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,451
Reaction score
3,819
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
What’s wrong with 2100 rpm? If a gear vendor is not in the budget, a 4L80 is your only other option, and I doubt you could do that any cheaper.
 

84 M1008

Full Access Member
Joined
May 11, 2018
Posts
363
Reaction score
197
Location
New York
First Name
Wayne
Truck Year
1984
Truck Model
M1008 K30
Engine Size
6.2 diesel
I'm running a th400 with 4:56 gears. I just want an OD so I don't redline trying to do the speed limit. And then theres guys who have an OD and they want another! Lol
The other solution is a 700R4. In lockup, it's essentially a 5 speed dropping another 200 Rpm's because of no torque converter slippage. In a gas engine it's not that much but in a diesel it makes a big difference .
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,451
Reaction score
3,819
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
If gear vendor is advising against towing, I’m guessing the payload is far beyond what a 700 would be reliable. Gear vendor is suppose to be good to 1500hp, and was originally designed for motor homes and RVs. I can’t imagine why they would advise against towing. I know the offer a deep sump pan with provisions for coolers.
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,192
Reaction score
8,030
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
The other solution is a 700R4. In lockup, it's essentially a 5 speed dropping another 200 Rpm's because of no torque converter slippage. In a gas engine it's not that much but in a diesel it makes a big difference .

A 700 in a 5k# truck is not an option. Had a built 700 in an El Camino and it worked fine. Probably save the money and get a good used of LS/4l80. I've learned my lesson on going backwards technology wise.
 

84 M1008

Full Access Member
Joined
May 11, 2018
Posts
363
Reaction score
197
Location
New York
First Name
Wayne
Truck Year
1984
Truck Model
M1008 K30
Engine Size
6.2 diesel
What do you mean by 'built?
 

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,218
Reaction score
12,015
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
If gear vendor is advising against towing, I’m guessing the payload is far beyond what a 700 would be reliable. Gear vendor is suppose to be good to 1500hp, and was originally designed for motor homes and RVs. I can’t imagine why they would advise against towing. I know the offer a deep sump pan with provisions for coolers.

I get the impression from reading their material that it's not about the overdrive unit itself, but where the engine power curves end up at the lower RPM that make it unsuitable for towing.
 

rpcraft

Full Access Member
Joined
May 31, 2016
Posts
1,333
Reaction score
512
Location
Texas
First Name
Robert
Truck Year
1985
Truck Model
Jimmy
Engine Size
LS 6.0 364 CID
Plenty of 700R4's went behind big blocks and lasted ages. Just add a trans cooler and make sure its not rebuilt by a hack and it should be fine. Otherwise you can go with a 4l80e and get a trans controller. The GM 0411 PCM can be used as a stand-alone controller as well as the ones that are made by companies like TCI and whoever else but those things can be quite spendy and the 4l80E still does not have as good as a low first gear as the 700r4/4l60e does... Just offering some feedback.
 

highdesertrange

Full Access Member
Joined
Dec 19, 2013
Posts
1,066
Reaction score
211
Location
kalifornia
First Name
mike
Truck Year
1978
Truck Model
k30
Engine Size
454
if you are getting that a Gear Vendor shouldn't be used for towing it's not because of the strength of the unit it's because you are out of your power band and would be lugging your engine.

double overdrive rarely works. you would need a super low axle ratio and or massive increases in the speed limit.

highdesertranger
 

Croc1990

Full Access Member
Joined
Jul 14, 2017
Posts
101
Reaction score
27
Location
Saskatchewan, canada
First Name
Dakota
Truck Year
1983
Truck Model
K25
Engine Size
5.7
Or this...
xc_hide_links_from_guests_guests_error_hide_media
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,170
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
Oh, yeah, that's great. IF, you don't mind driving something that looks like a refugee from a junkyard. I'm sorry, but the whole point of an automatic trans, is that it's AUTOMATIC. Why every time someone comes up with a more complicated way to do something half-assed, it gets treated like the greatest thing since sliced bread, is beyond me. yeah, that looks much better than hooking up a controller, putting it in drive and enjoying the ride. This world really needs some chlorine dumped into the gene pool.
 

Croc1990

Full Access Member
Joined
Jul 14, 2017
Posts
101
Reaction score
27
Location
Saskatchewan, canada
First Name
Dakota
Truck Year
1983
Truck Model
K25
Engine Size
5.7
I saw it a few years ago was left kind of confused but whatever to each their own.
 

Latest posts

Forum statistics

Threads
44,166
Posts
950,714
Members
36,280
Latest member
rodfarm
Top