82 Scottsdale paint correction and exterior resto

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

82maple

Junior Member
Joined
May 15, 2019
Posts
14
Reaction score
17
Location
Cali
First Name
Ruch
Truck Year
1982
Truck Model
Scottsdale
Engine Size
305
I finally got my Scottsdale down to the detailer for a 2 stage paint correction and ceramic coat. it’s the original paint so I’m going for the patina look on the outside with new trim and Accessories (I’ll update photos as more gets done)
A few pics b4 the detail

You must be registered for see images attach


You must be registered for see images attach
 
Last edited:

82maple

Junior Member
Joined
May 15, 2019
Posts
14
Reaction score
17
Location
Cali
First Name
Ruch
Truck Year
1982
Truck Model
Scottsdale
Engine Size
305
After removing the camper the paint was worn down around the back cab where the seal of the camper was also some surface rust under the window. I removed the back window sanded the damage area. Then I used a rust dissolver and rust converter to stop the rust followed by primer and paint

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

Big Chip

Full Access Member
Joined
Oct 19, 2017
Posts
4,656
Reaction score
6,734
Location
Michigan
First Name
Kevin
Truck Year
1979
Truck Model
C35
Engine Size
454
Very nice.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,439
Reaction score
28,345
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
That's going to look great. So the goal is glossy as possible, and whatever primer shows through, will simply show through? No exposing primer in more areas on purpose? If so, I like it!

This does bring up a question for me though because I keep hearing it more and more often. When did it start being called the fancy sounding "paint correction"? It used to be just called a buff job.
 

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,218
Reaction score
12,014
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
I'm going to guess you can charge more for a "paint correction" than a buff job.
 

82maple

Junior Member
Joined
May 15, 2019
Posts
14
Reaction score
17
Location
Cali
First Name
Ruch
Truck Year
1982
Truck Model
Scottsdale
Engine Size
305
So a buff job is pretty vague term. There are more then one type of ways to buff.
A color correction is a term used to describe all buffing steps to eliminate paint flaws and imperfections.
basically a color correction is multi step process to make the paint perfect
 

Wumbo

Full Access Member
Joined
Dec 12, 2018
Posts
1,084
Reaction score
3,997
Location
Illinois
First Name
Rob
Truck Year
1986
Truck Model
C20
Engine Size
454
That's looking good

:favorites13:
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,439
Reaction score
28,345
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
So a buff job is pretty vague term. There are more then one type of ways to buff.
A color correction is a term used to describe all buffing steps to eliminate paint flaws and imperfections.
basically a color correction is multi step process to make the paint perfect

I know it's a vague term and all, I was just wondering when "paint correction" terminology came about, or maybe it was just a regional thing for a while. A while back, a friend of mine with a GTI told me he was going to drop it off to get a "stage one paint correction" and I was like, WTF are you talking about, lol. He explained it to me and I said "oh, so you just want it buffed, polished and whatever other steps are needed to remove the minor scratches". At the time, I just thought it was a new term used by the "sophisticated car" people to differentiate themselves from the others.

But the term is popping up more often now. I guess I'm unsophisticated, haha.
 

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,218
Reaction score
12,014
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
Compound, polish and wax.
 

82maple

Junior Member
Joined
May 15, 2019
Posts
14
Reaction score
17
Location
Cali
First Name
Ruch
Truck Year
1982
Truck Model
Scottsdale
Engine Size
305
Here is a couple b4 and a few afters

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

Big Chip

Full Access Member
Joined
Oct 19, 2017
Posts
4,656
Reaction score
6,734
Location
Michigan
First Name
Kevin
Truck Year
1979
Truck Model
C35
Engine Size
454
I know it's a vague term and all, I was just wondering when "paint correction" terminology came about, or maybe it was just a regional thing for a while. A while back, a friend of mine with a GTI told me he was going to drop it off to get a "stage one paint correction" and I was like, WTF are you talking about, lol. He explained it to me and I said "oh, so you just want it buffed, polished and whatever other steps are needed to remove the minor scratches". At the time, I just thought it was a new term used by the "sophisticated car" people to differentiate themselves from the others.

But the term is popping up more often now. I guess I'm unsophisticated, haha.
It seems like a fancy term to get more money from you. Like janitors are engineers and grease monkeys are technicians type of thing.
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,170
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
That's going to look great. So the goal is glossy as possible, and whatever primer shows through, will simply show through? No exposing primer in more areas on purpose? If so, I like it!

This does bring up a question for me though because I keep hearing it more and more often. When did it start being called the fancy sounding "paint correction"? It used to be just called a buff job.
Probably around the same time that something catching fire became a "thermal event" lol.
 

82maple

Junior Member
Joined
May 15, 2019
Posts
14
Reaction score
17
Location
Cali
First Name
Ruch
Truck Year
1982
Truck Model
Scottsdale
Engine Size
305
My moldings can in and there is not enough Length Gonna ordered more :mad3: I also double side taped on the old Scottsdale emblem to get an idea of what it’s going to look like once they come in

You must be registered for see images attach
 

Joe T

Full Access Member
Joined
Jul 10, 2019
Posts
454
Reaction score
311
Location
Houston
First Name
Joe
Truck Year
1987
Truck Model
K10
Engine Size
350
Subscribing.

Have a similar project. Debating on replacing the trim.

Need to fix rock chips below the trimline. How was the blend process? Any close ups of the final result?
 

Latest posts

Forum statistics

Threads
44,163
Posts
950,654
Members
36,276
Latest member
2manysquares2care
Top