6.2l diesel starter wiring

[Gil edwards]

Morning everyone. New to the forum, need a little help. I just picked up a 1982 k10 with a 6.2l diesel. The truck has sat for years, so my son and I are going to get it running. On inspection, we found that the wiring to the starter was laying on the exhaust manifold and for the most part the harness is melted. Does anyone have a diagram or image of where the wired physically run to the starter? Thanks in advance.

We are keeping track of our progress if you’re interested.

xc_hide_links_from_guests_guests_error_hide_media

You must be registered for see images attach

 

[chengny]

Morning everyone. New to the forum, need a little help. I just picked up a 1982 k10 with a 6.2l diesel. The truck has sat for years, so my son and I are going to get it running. On inspection, we found that the wiring to the starter was laying on the exhaust manifold and for the most part the harness is melted. Does anyone have a diagram or image of where the wired physically run to the starter? Thanks in advance.

We are keeping track of our progress if you’re interested.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

The attached might provide some guidance.

The LL4 is a heavy duty version of the LH6 - but they are both 6.2 liter diesels. The drawings were pulled from the "engine electrical" section of the 1982 Service Manual.